Dear support
I updated PC 8024 fw to 5.1.2.3 ,FW download and cpld update (6)successfully ,but when I boot image1(3.1.4.5) to image2 (5.1.2.3),it will show “met an error on decompressing ,switch needs to restart. Then it would to boot image1.I wanted to delete image2,but failed,when reload the switch ,the image2 would recover.When i want to re-update image2 ,it would show "cfiP33Write: Failed at address = fe969180, Size 4.....".Even via Xmode,it would prompt that.Please help me,thanks!
The whole log ,when update FW and recover:
console#show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
--------------------------------------------------------------------
unit image1 image2 current-active next-active
--------------------------------------------------------------------
1 3.1.4.5 <none> image1 image1
console#cop show interfaces p interface out-of-band
IP Address..................................... 192.168.72.30
Subnet Mask.................................... 255.255.255.0
Default Gateway................................ 0.0.0.0
IPv6 Prefix is ................................ FE80::5E26:AFF:FEA3:1E16/64
ServPort Configured Protocol Current........... None
Burned In MAC Address.......................... 5C26.0AA3.1E16
console#copy t192.168.72.10/PC8024v5.1.7.5.stk image
Mode........................................... TFTP
Set TFTP Server IP............................. 192.168.72.10
TFTP Path...................................... ./
TFTP Filename.................................. PC8024v5.1.7.5.stk
Data Type...................................... Code
Destination Filename........................... image
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
cfiP33Write: Failed at address = fe969180, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 1591
0x545c180 (tXbdService): checkStatus() ERROR line 1911
0x545c180 (tXbdService): checkStatus() ERROR line 573
cfiP33Write: Failed at address = ff803410, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 1591
0x545c180 (tXbdService): checkStatus() ERROR line 1911
0x545c180 (tXbdService): checkStatus() ERROR line 573
cfiP33Write: Failed at address = ff804410, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line cfiP331591Write
0x545c180 (: Failed at addresstXbdService = ): checkStatus() ERROR line ff8054101911
0x545c180, Size (tXbdService4): checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed ): at address = checkStatus() ERROR line ff8064101591
0x545c180, Size (tXbdService4): checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed ): at address = checkStatus() ERROR line ff807410573
0x545c180, Size (tXbdService4): checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed a): t address = checkStatus() ERROR line 1911ff808410
0x545c180, Size (tXbdService4): checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed at): address = checkStatus() ERROR line f1591f809410
0x545c180, Size (tXbdService4): checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed at): address = checkStatus() ERROR line f573f80a410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed at ): address = checkStatus() ERROR line ff191180b410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed at a): ddress = checkStatus() ERROR line ff815910c410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed at a): ddress = checkStatus() ERROR line ff85730d410
0x545c180 (tXbdService, Size ): 4checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed at ad): dress = checkStatus() ERROR line ff801911e410
0x545c180 (tXbdService, Size ): 4checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed at add): ress = checkStatus() ERROR line ff80f1591410
0x545c180 (tXbdService, Size ): checkStatus() ERROR line 41911
0x545c180 (
tXbdService): checkStatus() ERROR line cfiP33Write573
0x545c180: Failed at ad (dress = tXbdServiceff810410): checkStatus() ERROR line , S1591ize
0x545c180 (tXbdService4): checkStatus() ERROR line 1911
0x545c180 (tXbdServicecfiP33Write): : Failed at addrescheckStatus() ERROR line s = 573
0x545c180ff811410 (tXbdService, Size ): checkStatus() ERROR line 41591
0x545c180 (tXbdServicecfiP33Write): : Failed at addresscheckStatus() ERROR line = 1911
0x545c180ff812410 (tXbdService, Size ): checkStatus() ERROR line 4573
0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at add1591ress =
0x545c180ff813410 (tXbdService, Size ): checkStatus() ERROR line 41911
0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at add573ress =
0x545c180 (ff814410tXbdService, Size ): checkStatus() ERROR line 41591
0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at addr1911ess =
0x545c180 (fe025e10tXbdService, Size ): TcheckStatus() ERROR line 4573F
0xT545c180 (tXbdServiceP): cfiP33WricheckStatus() ERROR line 1591te
c0x: Fa545c180o (iled at adtXbdServiced): dresscheckStatus() ERROR line e1911 =
0xfe0545c180t (26e10tXbdServicer): , Size checkStatus() ERROR line a5734
n0x
545c180s (ftXbdServicecfiP33): echeckStatus() ERROR line Write1591r
0x: Failed at addres545c180 (s = tXbdServices): fe027e10checkStatus() ERROR line t1911, Size
a0x4545c180r (
tXbdServicet): cfiP33WritecheckStatus() ERROR line i573: Failed at add
n0xress = 545c180g (fe028e10tXbdService):
checkStatus() ERROR line , Size 1591
0x4545c180
(
tXbdService
): cfiP33WricheckStatus() ERROR line
1911te
00x: Fa545c180 (iled at adtXbdServiceb): dresscheckStatus() ERROR line y573 =
t0xfe02545c180e (9e10tXbdServices): , Size checkStatus() ERROR line 15914
t0x
545c180r (atXbdServicecfiP33): ncheckStatus() ERROR line Write1911s
0x: Failed at addres545c180f (s = tXbdServicee): fe96a0eccheckStatus() ERROR line r573, Size
r0x276545c180e (
tXbdServiced): cfiP33WritecheckStatus() ERROR line .1591: Failed at a
.0xddress = 545c180 (.tXbdServicefe9601): 8ccheckStatus() ERROR line , Size 19114
0x545c180 (tXbdService
): checkStatus() ERROR line cfiP33573Write
0x545c180 (tXbdService: Failed ): at address = checkStatus() ERROR line fe96018c1591
0x545c180, Size (tXbdService4): checkStatus() ERROR line
1911
0x545c180 (tXbdService): checkStatus() ERROR line
573
0x545c180/DskVol// (tXbdService - disk check i): n progress ...checkStatus() ERROR line
1591
0x545c180 (tXbdService
): checkStatus() ERROR line /1911DskVol//files
0x545c180
(tXbdService/DskVol//files/vpd.): bincheckStatus() ERROR line
573
0x545c180/DskVol//files/ (log2.bintXbdService
): checkStatus() ERROR line /DskVol//f1591iles/boot.dim
0x545c180 (tXbdService
): checkStatus() ERROR line /DskVol//f1911iles/crashdump.c
tl0x545c180 (tXbdService
): checkStatus() ERROR line /DskVo573l//files/image1
0x 545c180 (tXbdService ): checkStatus() ERROR line 1591
0x545c180 (tXbdService): checkStatus() ERROR line 1911
0x545c180 (tXbdService): checkStatus() ERROR line
573
0x545c180/DskVol//files/hpc_ (broad.cfgtXbdService
): checkStatus() ERROR line /DskVol//1591files/slog2.txt
0x 545c180 (tXbdService ): checkStatus() ERROR line 1911
0x545c180 (tXbdService ): checkStatus() ERROR line
573
0x545c180/DskVol//files/o (log2.txttXbdService ): checkStatus() ERROR line
646
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
cfiP33Write: Failed at address = fe969190, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 1591
0x545c180cfiP33Write (tXbdService: Failed at addr): ess = checkStatus() ERROR line ff8034191110
0x545c180 (tXbdService, Size ): checkStatus() ERROR line 4573
0x545c180 (cfiP33WritetXbdService: Failed at addre): ss = checkStatus() ERROR line ff8044115910
0x545c180 (tXbdService, Size ): checkStatus() ERROR line 41911
0x545c180 (tXbdService
): checkStatus() ERROR line 573cfiP33Write
0x545c180: Failed at addr (ess = tXbdService): ff805410checkStatus() ERROR line , Siz1591e
0x545c180 (tXbdService4): checkStatus() ERROR line
1911cfiP33Write
0x545c180: Failed at addr (ess = tXbdService): ff806410checkStatus() ERROR line , Siz573e
0x545c180 (tXbdService4): checkStatus() ERROR line
1591cfiP33Write
0x: F545c1800 (ailed at atXbdService ): ddrescheckStatus() ERROR line b1911s =
y0xff545c180t (807410tXbdServicee): , Size checkStatus() ERROR line s5734
0x
545c180 (ttXbdServicecfiP33): rcheckStatus() ERROR line Write1591a
0x: Failed at addres545c180n (s = tXbdServices): ff808410checkStatus() ERROR line f1911, Size
e0x4545c180r (
tXbdServicer): cfiP33WritecheckStatus() ERROR line e573: Failed at add
d0xress = 545c180. (ff809410tXbdService): .checkStatus() ERROR line , Size 1591
.0x4545c180 (tXbdService
): checkStatus() ERROR line cfiP331911Write
0x545c180 (: Failed at addresstXbdService = ): checkStatus() ERROR line ff80a410573
0x545c180, Size (tXbdService4): checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed ): at address = checkStatus() ERROR line ff80b4101911
0x545c180, Size (tXbdService4): checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed a): t address = checkStatus() ERROR line 1591ff80c410
0x545c180, Size (tXbdService4): checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed a): t address = checkStatus() ERROR line 573ff80d410
0x545c180, Size (tXbdService4): checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed at): address = checkStatus() ERROR line f1911f80e410
0x545c180, Size (tXbdService4): checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed at ): address = checkStatus() ERROR line ff159180f410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed at ): address = checkStatus() ERROR line ff573810410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed at a): ddress = checkStatus() ERROR line ff8191111410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed at ad): dress = checkStatus() ERROR line ff8115912410
0x545c180 (tXbdService, Size ): 4checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed at ad): dress = checkStatus() ERROR line ff815733410
0x545c180 (tXbdService, Size ): checkStatus() ERROR line 41591
0x545c180 (
tXbdService): checkStatus() ERROR line cfiP33Write1911
0x545c180: Failed at a (ddress = tXbdServiceff814410): checkStatus() ERROR line , 573Size
0x545c180 (tXbdService4): checkStatus() ERROR line 1591
0x545c180 (tXbdServicecfiP33Write): : Failed at addrescheckStatus() ERROR line s = 1911
0x545c180fe025e10 (tXbdService, Size ): checkStatus() ERROR line 4573
0x545c180 (tXbdServicecfiP33Write): : Failed at addresscheckStatus() ERROR line = 1591
0x545c180fe026e10 (tXbdService, Size ): checkStatus() ERROR line 41911
0x545c180 (tXbdServicecfiP33Write): : Failed at addresscheckStatus() ERROR line = 573
0x545c180fe027e10 (tXbdService, Size ): checkStatus() ERROR line 41591
0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at add1911ress =
0x545c180fe028e10 (tXbdService, Size ): checkStatus() ERROR line 4573
0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at addr1591ess =
0x545c180 (fe029e10tXbdService, Size ): checkStatus() ERROR line 41911
0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at addr573ess =
0x545c180 (fe96018ctXbdService): , Size checkStatus() ERROR line 41591
0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at addre1911
ss = 0x0545c180fe96018c ( tXbdService, Size ): bcheckStatus() ERROR line 4573y
0xt545c180 (tXbdServicee): cfiP33WcheckStatus() ERROR line s1591rite
0x: 545c180t (Failed at tXbdServicer): addrecheckStatus() ERROR line a1911ss =
n0xf545c180s (e96018ctXbdServicef): , Size checkStatus() ERROR line e5734
r0x
545c180r (cfiP33WritetXbdServicee): : Failed acheckStatus() ERROR line d1591t address
.0x= 545c180. (fe96tXbdService.): 018ccheckStatus() ERROR line , Size 1911
0x545c1804 (tXbdService):
checkStatus() ERROR line error accessi573ng cache for dos v
0xolume 0x545c180/ (DskVol//tXbdService - disk check in p): rogress ...checkStatus() ERROR line
1591
1a4673d00x/Dsk545c180Vol//files (
tXbdService
): checkStatus() ERROR line 1911/DskVol//files/v
pd.bin0x545c180 (tXbdService
): checkStatus() ERROR line /D573skVol//files/log2
.bin0x545c180 (tXbdService
): checkStatus() ERROR line /Dsk1591Vol//files/boot.
dim0x545c180 (tXbdService ): checkStatus() ERROR line
1911
/DskVol//files/cras0xhdump.ctl545c180 (tXbdService
): checkStatus() ERROR line 573/DskVol//files/im
age10x545c180 (tXbdService ): checkStatus() ERROR line 1591
0x545c180 (tXbdService ): checkStatus() ERROR line 1911
0x 545c180 (tXbdService ): checkStatus() ERROR line 573
0x545c180
(tXbdService): /DskVol//files/hpcheckStatus() ERROR line c_broad.cfg1591
0x545c180 (tXbdService/DskVol//files/s): log2.txtcheckStatus() ERROR line 1911
0x545c180 (tXbdService ): checkStatus() ERROR line 573
0x 545c180 (tXbdService
): checkStatus() ERROR line /DskVol//646files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
5105152 bytes transferred...
11139584 bytes transferred...
12307736 bytes transferred
Verifying CRC of file in Flash File System
cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
Distributing the code to the members of the stack!
File transfer operation completed successfully.
console#show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
--------------------------------------------------------------------
unit image1 image2 current-active next-active
--------------------------------------------------------------------
1 3.1.4.5 5.1.2.3 image1 image1
console#boot system image2
Activating image image2 ..cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180
(tXbdService): checkStatus() ERROR line
646
console#
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
console#boot system image2
Activating image image2 ..
console#show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
--------------------------------------------------------------------
unit image1 image2 current-active next-active
--------------------------------------------------------------------
1 3.1.4.5 5.1.2.3 image1 image2
console#reload
Management switch has unsaved changes.
Are you sure you want to continue? (y/n) y
Configuration Not Saved!
Are you sure you want to reload the stack? (y/n) y
Reloading all switches.cfiP33Write: Failed at address = ff340f8c, Size 116
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
Adding 2970 symbols for standalone.
Boot Menu 3.1.4.5
CPU Card ID: 0x10508548
CFI Probe: Found x16 device in x16 mode
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe960178, Size 4
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe96017c, Size 4
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0x3cab5f0
XBD device block I/O handle: 0x10001
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode: copyback (DOS_WRITE)
max # of simultaneously open files: 52
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: NO LABEL ; (in boot sector: )
- volume Id: 0xf6
- total number of sectors: 61,376
- bytes per sector: 512
- # of sectors per cluster: 4
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 60
- # of FAT table copies: 2
- # of hidden sectors: 4
- first cluster is in sector # 136
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- file name format: 8-bit (extended-ASCII)
- root dir start sector: 121
- # of sectors per root: 15
- max # of entries in root: 240
FAT handler information:
------------------------
- allocation group size: 2 clusters
- free space on volume: 9,367,552 bytes
cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0Boot Menu (3tXbdService.1.4.5):
checkStatus() ERROR
line /DskVol//646
- disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
Select an option. If no selection in 10 seconds then
operational code will start.
1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):2
Boot Menu 3.1.4.5
Options available
1 - Start operational code
2 - Change baud rate
3 - Retrieve event log using XMODEM
4 - Load new operational code using XMODEM
5 - Display operational code vital product data
6 - Abort boot code update
7 - Update boot code
8 - Delete backup image
9 - Reset the system
10 - Restore configuration to factory defaults (delete config files)
11 - Activate Backup Image
12 - Password Recovery Procedure
13 - Reformat and restore file system
[Boot Menu] 1
Operational Code Date: Wed May 5 00:58:31 2010
Uncompressing.....
Host Name: bootHost
Target Name: vxTarget
User: target
usrNetIpAttachCommon: unknown network device
Adding 70479 symbols for standalone.
CPU: Freescale E500 : Unknown system version. Processor #0.
Memory Size: 0x40000000. BSP version 2.0/2.
Created: May 5 2010, 00:01:39
ED&R Policy Mode: deployed
remLib: Not initialized.
remLib: Not initialized.
CFI Probe: Found x16 device in x16 mode
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe960178, Size 4
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe96017c, Size 4
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0x545ddc0
XBD device block I/O handle: 0x10001
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode: copyback (DOS_WRITE)
max # of simultaneously open files: 52
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: NO LABEL ; (in boot sector: )
- volume Id: 0xf6
- total number of sectors: 61,376
- bytes per sector: 512
- # of sectors per cluster: 4
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 60
- # of FAT table copies: 2
- # of hidden sectors: 4
- first cluster is in sector # 136
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- file name format: 8-bit (extended-ASCII)
- root dir start sector: 121
- # of sectors per root: 15
- max # of entries in root: 240
FAT handler information:
------------------------
- allocation group size: 2 clusters
- free space on volume: 9,367,552 bytes
cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
Error opening the image file image1
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
PCI unit 0: Dev 0xb820, Rev 0x11, Chip BCM56820_B0, Driver BCM56820_A0
SOC unit 0 attached to PCI device BCM56820_B0
Adding BCM transport pointers
Configuring CPUTRANS TX
Configuring CPUTRANS RX
hpc - No stack ports. Starting in stand-alone mode.
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
cfiP33Write: Failed at address = ff340f8c, Size 116
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERR
OR line 646
<186> MAR 31 16:00:30 0.0.0.0-1 UNKN[1073741088]: bootos.c(209) 1 % Event(0xaaaaaaaa)
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
Instantiating RamCP: as rawFs, device = 0xe0001
Formatting RamCP: for DOSFS
Instantiating RamCP: as rawFs, device = 0xe0001
Formatting...
RamCP:/ - disk check in progress ...
RamCP:/ - Volume is OK
total # of clusters: 1,975
# of free clusters: 1,973
# of bad clusters: 0
total free space: 1,010,176
max contiguous free space: 1,010,176 bytes
# of files: 0
# of folders: 0
total bytes in files: 0
# of lost chains: 0
total bytes in lost chains: 0
OK.
(Unit 1 - Waiting to select management unit)>cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
Applying Global configuration, please wait ...
Applying Interface configuration, please wait ...
console>enable
console#show devshell cpldTest
Board Type : Campbell 24T
Board Version : 3
CPLD Revision : 6 (0x6)
RPS2 Present
RPS2 Status : Working
RPS2 Temperature : Normal
RPS2 Fan Status : Working
RPS1 Present
RPS1 Status : Working
RPS1 Temperature : Normal
RPS1 Fan Status : Working
Port SFP Status Link Status Tx Power
---- ---------- ----------- --------
21 Present Down Enabled
22 Present Down Enabled
23 Present Down Enabled
24 Present Down Enabled
Fan control IC has failed
Fan1 Status : Working
Fan2 Status : Working
Fan3 Status : Working
value = 36 = 0x24
console#show version
Image Descriptions
image1 : default image
image2 :
Images currently available on Flash
--------------------------------------------------------------------
unit image1 image2 current-active next-active
--------------------------------------------------------------------
1 3.1.4.5 5.1.2.3 image1 image1
console#reload
Are you sure you want to reload the stack? (y/n) y
Reloading all switches.cfiP33Write: Failed at address = ff340f8c, Size 116
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
Adding 2970 symbols for standalone.
Boot Menu 3.1.4.5
CPU Card ID: 0x10508548
CFI Probe: Found x16 device in x16 mode
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe960178, Size 4
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe96017c, Size 4
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0x3cab5f0
XBD device block I/O handle: 0x10001
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode: copyback (DOS_WRITE)
max # of simultaneously open files: 52
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: NO LABEL ; (in boot sector: )
- volume Id: 0xf6
- total number of sectors: 61,376
- bytes per sector: 512
- # of sectors per cluster: 4
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 60
- # of FAT table copies: 2
- # of hidden sectors: 4
- first cluster is in sector # 136
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- file name format: 8-bit (extended-ASCII)
- root dir start sector: 121
- # of sectors per root: 15
- max # of entries in root: 240
FAT handler information:
------------------------
- allocation group size: 2 clusters
- free space on volume: 9,367,552 bytes
cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0Boot Menu (3tXbdService.1.4.5):
checkStatus() ERROR
line /DskVol//646
- disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
Select an option. If no selection in 10 seconds then
operational code will start.
1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):2
Boot Menu 3.1.4.5
Options available
1 - Start operational code
2 - Change baud rate
3 - Retrieve event log using XMODEM
4 - Load new operational code using XMODEM
5 - Display operational code vital product data
6 - Abort boot code update
7 - Update boot code
8 - Delete backup image
9 - Reset the system
10 - Restore configuration to factory defaults (delete config files)
11 - Activate Backup Image
12 - Password Recovery Procedure
13 - Reformat and restore file system
[Boot Menu] 11
cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0 (tXbdService): checkStatus() ERROR line
646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0 (tXbdService): checkStatus() ERROR line 646
/DskVol// - disk check in progress ...
/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize
/DskVol// - Volume is OK
total # of clusters: 15,312
# of free clusters: 4,574
# of bad clusters: 0
total free space: 9,148 Kb
max contiguous free space: 9,367,552 bytes
# of files: 20
# of folders: 1
total bytes in files: 21,450 Kb
# of lost chains: 0
total bytes in lost chains: 0
Backup image - image2 activated.
[Boot Menu] ?
Boot Menu 3.1.4.5
Options available
1 - Start operational code
2 - Change baud rate
3 - Retrieve event log using XMODEM
4 - Load new operational code using XMODEM
5 - Display operational code vital product data
6 - Abort boot code update
7 - Update boot code
8 - Delete backup image
9 - Reset the system
10 - Restore configuration to factory defaults (delete config files)
11 - Activate Backup Image
12 - Password Recovery Procedure
13 - Reformat and restore file system
[Boot Menu] 1
Operational Code Date: Mon Oct 14 14:14:09 2013
Uncompressing.....
There was an error during decompression... resetting the switch
Adding 2970 symbols for standalone.