Here is my setup.
I have a 5224 in the basement, connected to an IPCop firewall/ISP and managing all the ports on the main floor of my house.
I have also installed a 5324 on the second floor (connected to the 5224) to manage the ports on the second floor.
I started reading more about the Spanning Tree.....
Currently this is how the 2 switches are configured (default values)
PowerConnect 5224
Spanning Tree State: Enabled
Spanning Tree Type: RSTP
Priority: 32768
Hello Time: 2 seconds
Maximum Age: 20 seconds
Forward Delay: 15 seconds
Bridge ID 32768.001422014A51
Designated Root 32768.001143F6BBD8
========================================
PowerConnect 5324
Spanning Tree State: Enabled
Spanning Tree Type: Classic STP
Priority: 32768
Hello Time: 2 seconds
Maximum Age: 20 seconds
Forward Delay: 15 seconds
Bridge ID 32768-00:11:43:f6:bb:d8
Root Bridge ID 32768-00:11:43:f6:bb:d8
How (if at all) should I change their configuration?
Sorry for the basic question.
Renato