I have two Dell switches and its a classical VLAN Scenario that does not want to work.
PowerConnect 6248 is connected to the outside world and from there i like to bring new subnet ( this is already done via ISP ) to new infrastructure that is connect to the other switch N3048.
ISP =====(port48) PowerConnect (port 11 and 12 as trunk)=====(port 11 and as trunk)N3048====(as access belong to VLAN 25)Servers.
So PowerConnect have many VLANs and works excellent, i have create this new VLAN 25 and this trunk ports. Also on port 48 i have enabled/allowed this new VLAN to go out to public. Make port 11 and 12 as trunks.
On the other switch port 11 and 12 are configured as trunks, and 20,21,22,23 are configured as access and assigned to VLAN 25 as it created.
So can somebody give some hints or tell me what is wrong with this scenario that does not work ?
simple configuration that i have on both switches
interface ethernet 1/g11
switchport mode trunk
interface ethernet 1/g12
switchport mode trunk
interface Gi1/0/11
switchport mode trunk
interface Gi1/0/12
switchport mode trunk
interface Gi1/0/20,21,22,23
switchport access VLAN 25
Also i have put this servers directly to the PowerConnect and they work excellent, so port 48 and ISP are ok.
Also i see that port 20,21,22,23 on N3048 the Egress rule is "Untagged"
