Setting with Cisco switch.

Hi there,

I'm a beginner engineer.

Maybe its problem is so easy to you guys.. , please help me.

I wonder why around "WS-C3560E-24TD-S" ports are Designated port.. even though Dell 8024F is Root switch.

Cisco WS-C3560E-24TD-S's STP mode : PVST

Dell 8024F, 7024P's STP mode : RSTP

----------------------------------------------------------------------------------------------------------------------------------------

After configuring like upper picture, I configured STP mode from PVST, RSTP to MSTP whole switches (Dell & Cisco)

Therefore, PC does not communicate with Internet.

I don't know where do I handle it.

Thank you.

cf)

CISCO_3560E#show spanning-tree vlan 2

VLAN0002
Spanning tree enabled protocol ieee
Root ID Priority 32770
Address 001e.7a4f.c180
This bridge is the root
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Bridge ID Priority 32770 (priority 32768 sys-id-ext 2)
Address 001e.7a4f.c180
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300

Interface Role Sts Cost Prio.Nbr Type
------------------- ---- --- --------- -------- --------------------------------
Gi0/1 Desg FWD 4 128.1 P2p Edge
Te0/2 Desg FWD 2 128.30 P2p

CISCO_3560E#

Dell_7024P#show spanning-tree active

Spanning tree Enabled (BPDU flooding : Disabled) Portfast BPDU filtering Disabled mode mst
CST Regional Root: F0:00:5C:26:0A:AD:49:AF
Regional Root Path Cost: 0

###### MST 0 Vlan Mapped: 1-4, 50, 90
ROOT ID
Priority 32768
Address D067.E58D.BFDD
Path Cost 20000
Root Port Gi1/0/3
Hello Time 2 Sec Max Age 20 sec Forward Delay 15 sec
Bridge ID
Priority 61440
Address 5C26.0AAD.49AF
Hello Time 2 Sec Max Age 20 sec Forward Delay 15 sec
Interfaces

Name State Prio.Nbr Cost Sts Role RestrictedPort
------ -------- --------- --------- ---- ----- --------------
Gi1/0/1 Enabled 128.1 20000 FWD Desg No
Gi1/0/2 Enabled 128.2 20000 FWD Desg No
--More-- or (q)uit
Gi1/0/3 Enabled 128.3 20000 FWD Root No

Dell_7024P#

Dell_8024F#show spanning-tree active

Spanning tree Enabled (BPDU flooding : Disabled) Portfast BPDU filtering Disabled mode rstp
CST Regional Root: 80:00:D0:67:E5:8D:BF:DD
Regional Root Path Cost: 0

###### MST 0 Vlan Mapped: 1-2
ROOT ID
Priority 32768
Address D067.E58D.BFDD
This Switch is the Root.
Hello Time 2 Sec Max Age 20 sec Forward Delay 15 sec
Interfaces

Name State Prio.Nbr Cost Sts Role RestrictedPort
------ -------- --------- --------- ---- ----- --------------
Te1/0/20 Enabled 128.20 2000 FWD Desg No
Te1/0/22 Enabled 128.22 20000 FWD Desg No

Dell_8024F#