I have configured Vlan 12,8,9,10 with different IP range and I have configured port-channel 18,etc.Now I want to access all the range's from port channel 18, Please guide me , how to configure this.
Note : We are using Blade server with switch - M e1000 and I have configured
BLBSWA2#show ip interface port-channel 18
Port-channel 18 is up, line protocol is up
Description: ####connected to Blade Server 8####
Internet address is not set
IP MTU is 1500 bytes
Directed broadcast forwarding is disabled
Proxy ARP is enabled
Split Horizon is enabled
Poison Reverse is disabled
ICMP redirects are not sent
ICMP unreachables are not sent
interface Port-channel 18
description ####connected to Blade Server 8####
no ip address
portmode hybrid
switchport
spanning-tree rstp edge-port
channel-member TenGigabitEthernet 0/8
vlt-peer-lag port-channel 18
no shutdown
BLBSWA2#show vlt detail
Local LAG Id Peer LAG Id Local Status Peer Status Active VLANs
------------ ----------- ------------ ----------- -------------
11 11 UP UP 1, 12
12 12 UP UP 1
13 13 UP UP 1, 12
14 14 UP UP 1, 12
15 15 UP UP 1, 12
16 16 DOWN DOWN 1
17 17 UP DOWN 12
18 18 UP DOWN 12