Hello,
I am configuring my first Dell Switch Stack (having come from a Juniper background) and I seem to be having an issue with some VLAN routing on my stack.
My set up is as follows;
Four N4032F Switches in a stack.
Four FX2S Chassis with multiple blades within each with esxi installed.
8 x 10Gbps per FX2S.
2 x 10Gbps link to each switch in the stack per FX2s
8-ports per FX2S in a LACP port-group, trunk with vlan 100 allowed.
ESXi has a mgmt IP configured, on VLAN 100 (vlan specified), and the DG is configured on the stack.
Each FX2S has its own port channel/LAG group.
Chassis one contains esxi 1 & 2
esxi 1 - 192.168.1.1
esxi 2 - 192.168.1.2
chassis 2 contains esxi 3 & 4
esxi 3 - 192.168.1.3
esxi 4 - 192.168.1.4
From the switch cli, I can ping 192.168.1.1, and esxi 192.168.1.2 but no other esxi hosts.
If I change the ip on the working esxi hosts, they still ping.
The port channel, interface, esxi hosts are all configured the same (bar the vpc id etc).
No idea what is happening but it is flummoxing me!
Any ideas what could cause this?!
Many Thanks in advance.