Hi,
Access between Cisco(2960s) and Dell 6248
Without having any VLAN configuration on Dell switch, How can we access VLANs from Cisco
switch? but I can PING (web, ssh) the IP address of dell switch.How does it happen?
Pls advice me any wrong?
Cisco Configuration
interface GigabitEthernet1/0/9
description iSCSI iSCSI Swtich2 MGMT P45(Dell)
switch port access vlan 4
switchport mode access
spanning-tree portfast
interface GigabitEthernet1/0/10
description "iSCSI-SW2 P48"(Dell)
switchport access vlan 3
switchport mode access
spanning-tree portfast
interface GigabitEthernet1/0/12
description "Link to iSCSI-SW1 P48"(Dell)
switchport access vlan 2
switchport mode access
spanning-tree portfast
vlan4
ip address 10.x.x.2 255.255.255.224
ip default-gateway 10.x.x.x
Dell Configuration
System Description "PowerConnect 6248, 3.3.14.2, VxWorks 6.5"
!System Software Version 3.3.14.2
!Cut-through mode is configured as disabled
!
configure
snmp-server location " COLO"
hostname "PROSANSW"
stack
member 1 2
member 2 2
exit
switch 1 priority 1
ip address 10.x.x.1 255.255.255.224
ip default-gateway 10.x.x.x
username "admin" password 1682ee4c488eed4a8e8a4a5c1ce40098 level 15 encrypted
line console
password 1682ee4c488eed4a8e8a4a5c1ce40098 encrypted
exit
enable password 1682ee4c488eed4a8e8a4a5c1ce40098 encrypted
exit