Hello everyone,
I hope I can get some help. I am new to Dell 6224 and trying to get vlan routing working. Starting with a basic configuration.
Vlan 30 = 200.168.30.x
vlan 35= 200.168.35.x
laptop#1 vlan 35: 200.168.35.200 /24 and Default gateway of 200.168.35.254
laptop#2 vlan 30: 200.168.30.200/24 and default gateway of 200.168.30.254
When testing from either laptop I am not able to ping the the respective default gateway. Also when I put another laptop on each vlan I am able to ping clients on same vlan. But I can not ping clients on different vlans.
my current test lab config is below.for the switch When I put a laptop and plug it into switch port 1 and use a 200.168.35.200 and a default gateway address of 200.168.35.254
!Current Configuration:
!System Description "PowerConnect 6224, 3.3.6.4, VxWorks 6.5"
!System Software Version 3.3.6.4
!Cut-through mode is configured as disabled
!
configure
vlan database
vlan 30,35
vlan routing 30 1
vlan routing 35 2
exit
stack
member 1 1
exit
ip address 128.20.30.1 255.255.0.0
ip default-gateway 128.20.22.12
ip routing
interface vlan 30
name "vlan30 Clients"
routing
ip address 200.168.30.254 255.255.255.0
exit
interface vlan 35
name "vlan35 clients"
routing
ip address 200.168.35.254 255.255.255.0
exit
username "admin" password 70e8ae439a6fd4f5817c6a04f026f48f level 15 encrypted
!
interface ethernet 1/g1
switchport mode general
switchport general allowed vlan add 35
exit
!
interface ethernet 1/g22
switchport mode general
switchport general allowed vlan add 30
exit