Hello,
I want to use VRRP between 2 M8024-K
I use this:
SWITCH1
interface vlan 25
ip address 192.168.25.251255.255.255.0
interface vlan 25
vrrp 25
vrrp 25 mode
vrrp 25 ip 192.168.25.254
vrrp 25 track interface Vl25
vrrp 25 timers advertise 180
vrrp 25 accept-mode
SWITCH2
interface vlan 25
ip address 192.168.25.252 255.255.255.0
vrrp 25
vrrp 25 mode
vrrp 25 ip 192.168.25.254
vrrp 25 track interface Vl25
vrrp 25 priority 254
vrrp 25 timers advertise 180
vrrp 25 accept-mode
I can ping .251 and .252 but not .254
sh vrrp brief
Vl25 25 254 192.168.25.254 Enable Initialize
#show vrrp
Admin Mode..................................... Enable
Router Checksum Errors......................... 0
Router Version Errors.......................... 0
Router VRID Errors............................. 0
Vlan 25 - Group 25
Primary IP Address............................. 192.168.25.254
VMAC Address................................... 0000.5E00.0119
Authentication Type............................ None
Priority....................................... 254
Configured Priority............................ 254
Advertisement Interval (secs).................. 180
Accept Mode.................................... Enable
Pre-empt Mode.................................. Enable
Pre-empt delay................................. 0
Administrative Mode............................ Enable
State.......................................... Initialized
Timers Learn mode.............................. Disable
Description....................................
Track Interface................................ Vl25
Track Interface State.......................... Up
Track Interface Decrement Priority............. 10
No routes are tracked for this vrid and interface combination