Hi I have problem with negotiation on Powerconnect 5548
We have users on Enterasys 6000 and we want change to a power 5548
When move user to 5548 the 5548 Ports don´t negotiate properly or negotiate at 10 Mb, It´s not good
In the other hand, the same 5548 are connected with a couple of 10 Gbps front to a Cat3750X and have througput problems, the performance of the links are measure in Kb. Big Problem
The config on couple catalyst ports...
interface TenGigabitEthernet3/1/1
description Conexion_Stack01_Sw04-te4/0/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,206
switchport mode trunk
switchport nonegotiate
channel-group 2 mode active
On 5548 on couple of ports....
interface TenGigabitEthernet1/0/1
switchport mode trunk
channel-group 2 mode auto
Regards.
