I have a S4820T stack. The management interface has an IP address of 10.5.7.31. Below is a section of the config. I have PDU's connected to the switches in ports t0/28-30 & t1/28-30. These ports have been added to VLAN 407. The other VLAN on the switch is VLAN 402 which is being used for SANS. The IP's that have been added to the PDU's are 10.5.7.15 - 20. I cannot ping the PDU's. I am wondering if this could be a config problem on the S4820T or a problem with the PDU's. I'm new to the forums here. Any help or advise would be greatly appreciated.
interface Vlan 402
name Storage
ip address 10.5.2.254/24
mtu 12000
tagged Port-channel 31-32
untagged TenGigabitEthernet 0/0-7,10-27,31-45
untagged TenGigabitEthernet 1/0-7,10-27,31-45
untagged Port-channel 41
no shutdown
!
interface Vlan 407
name Management
no ip address
mtu 12000
tagged Port-channel 31-32
untagged TenGigabitEthernet 0/28-30
untagged TenGigabitEthernet 1/28-30
no shutdown
!
management route 0.0.0.0/0 10.5.7.1
!
ip route 0.0.0.0/0 10.5.2.1
