I understand this has been a known issue and am interested in seeing if there has been a fix or work around.
Platform is PC 6224
Version 3.2.0.9
Example:
interface vlan 452
routing
ip address 172.22.52.254 255.255.255.0
ip vrrp 52
ip vrrp 52 mode
ip vrrp 52 ip 172.22.52.1
ip vrrp 52 priority 250
ip vrrp 52 timers advertise 180
T#show ip vrrp interface vlan 452 52
Primary IP Address............................. 172.22.52.1
VMAC Address................................... 0000.5E00.0134
Authentication Type............................ None
Priority....................................... 250
Configured Priority............................ 250
Advertisement Interval (secs).................. 180
Pre-empt Mode.................................. Enable
Administrative Mode............................ Enable
State.......................................... Backup
Both L3 devices are responding to the hard addresses, but not the virtual.