Hi
I have the following problems with a powerconnect 5548
it was a member of a stack but crahed the stack.
i remove from it but now i can't boot it standalone.
here is the log
**************************************************
***************** SYSTEM RESET *****************
**************************************************
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.14 Built 02-Apr-2012 18:41:25
##
########### ##### ###### ######
############## ######### ###### ######
############### ######### ###### ######
################ ########## #### ###### ######
################ ######### ###### ###### ######
######################## ######### ###### ######
###### ############## ######## ####### ######
###### ###################### ######### ######
###### #################### ########## ######
###### ################### ########### ######
###### ################## ############# ######
###### ################################# ######
################################################# ############
################ ################ ############# ############
################ ############## ############# ############
############### ########## ############# ############
############## ######## ############# ############
########### #### ############# ############
##
PowerConnect 5548 device with Marvell ARM CPU core. 256 MByte SDRAM.
I-Cache 16 KB. D-Cache 16 KB. L2 Cache 256 KB. Cache Enabled.
MAC Address : f8:b1:56:29:90:6e.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
0% 50% 100%
Decompressing SW from image-2
0% 1% 2% 3% 4% 5% 6% 7% 8% 9% 10% 11% 12% 13% 14% 15% 16% 17% 18% 19% 20% 21% 22% 23% 24% 25% 26% 27% 28% 29% 30% 31% 32% 33% 34% 35% 36% 37% 38% 39% 40% 41% 42% 43% 44% 45% 46% 47% 48% 49% 50% 51% 52% 53% 54% 55% 56% 57% 58% 59% 60% 61% 62% 63% 64% 65% 66% 67% 68% 69% 70% 71% 72% 73% 74% 75% 76% 77% 78% 79% 80% 81% 82% 83% 84% 85% 86% 87% 88% 89% 90% 91% 92% 93% 94% 95% 100%
OK
Running from RAM...
*********************************************************************
*** Running SW Ver. 4.1.0.15 Date 20-Oct-2013 Time 10:23:39 ***
*********************************************************************
HW version is 00.00.02
Base Mac address is: f8:b1:56:29:90:6e
Dram size is : 256M bytes
Dram first block size is : 229376K bytes
Dram first PTR is : 0x1C00000
Dram second block size is : 4096K bytes
Dram second PTR is : 0xFC00000
Flash size is: 16M
01-Oct-2006 10:23:44 %CDB-I-LOADCONFIG: Loading running configuration.
01-Oct-2006 10:23:45 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - PowerConnect 5548
Device 0: GT_98DX4122 (BobCat)
Device 1: GT_98DX4123 (BobCat)
------------------------------------
-- Unit Number 1 --
------------------------------------
BobCat, Revision(A2), Cpu(800)
BobCat, Revision(A2), Cpu(800)
01-Oct-2006 10:24:01 %INIT-I-InitCompleted: Initialization task is completed
>
-----------------------------------
-- Unit Number 1 Master Enabled --
-----------------------------------
Tapi Version: v1.9.3.2
Core Version: v1.9.3.2
01-Oct-2006 10:24:07 %Fiber-I-SFP-PRESENT-CHNG: te1/0/1 SFP status is present.
01-Oct-2006 10:24:08 %Environment-I-FAN-STAT-CHNG: FAN# 1 status changed - Fan turned OFF.
01-Oct-2006 10:24:08 %Environment-I-FAN-STAT-CHNG: FAN# 2 status changed - Fan turned OFF.
01-Oct-2006 10:24:08 %Environment-I-PS-STAT-CHNG: PS# 1 status changed - operational.
01-Oct-2006 10:24:08 %Entity-I-SEND-ENT-CONF-CHANGE-TRAP: entity configuration change trap.
01-Oct-2006 10:24:09 %MLDP-I-MASTER: Switching to the Master Mode.
01-Oct-2006 10:24:09 %Stack-I-STCK-CFG-CHNG: Configuration changed: chain
01-Oct-2006 10:24:10 %SNMP-I-CDBITEMSNUM: Number of running configuration items loaded: 223
01-Oct-2006 10:24:10 %SNMP-I-CDBITEMSNUM: Number of startup configuration items loaded: 223
>lcli
sw-cng-dis01> 01-Oct-2006 12:24:13 %LINK-W-Down: gi1/0/1
01-Oct-2006 12:24:13 %LINK-W-Down: gi1/0/2
01-Oct-2006 12:24:13 %3SWCOS-F-PCLADDPCEBLOCK: Function SW2P_low_pcl_DVA_enable: TAPI error - failed to add PCE block, code Value is out of range
***** FATAL ERROR *****
Reporting Task: POLI.
Software Version: 4.1.0.15 (date 20-Oct-2013 time 10:23:39)
0x19f5cc
0x19c230
0x6b59c0
0x4aa614
0x4aaf0c
0x4ab0e0
0x8994c4
0x899708
0x89a74c
0x60b1b4
0x1548d8
**************************************************
***************** SYSTEM RESET *****************
**************************************************
At the boot prompt i remove the startup-config but it does exactly the same thing.
Is there a way to reset to factory default this switch?