I need to get Qnap 1679U-RP with Qnap 10G dual port card (Intel X520 based) to connect to stacked 2 x N4032 as port trunking 802.3ad
On the Qnap there is not much settings available :
Port Trunking & mode IEEE 802.3ad
On the switch(es) I have PO1 configured as Dynamic
console#show interfaces port-channel 1
Channel Ports Ch-Type Hash Type Min-links Local Prf
------- ----------------------------- -------- --------- --------- ---------
Po1 Active: Te1/0/19, Te2/0/19 Dynamic 7 1 Disabled
Hash Algorithm Type
1 - Source MAC, VLAN, EtherType, source module and port Id
2 - Destination MAC, VLAN, EtherType, source module and port Id
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, EtherType, source MODID/port
6 - Source/Destination IP and source/destination TCP/UDP port
7 - Enhanced hashing mode
But I have no connectivity at all
Seb