hi
i have a problem with my powerconnect 8164F with 6.1.0.1 version
i create the vlan 643
then i create an interface vlan
interface vlan 643
ip address 172.24.64.2 255.255.240.0
exit
put when i ping this ip from the switch
ping 172.24.64.2
Pinging 172.24.64.2 with 0 bytes of data:
4 packets transmitted, 0 packets received, 100% packet loss
round-trip (msec) min/avg/max = <10/<10/<10
in the log i have the following line
<173> Jun 11 14:39:29 172.16.8.100-2 TRAPMGR[1206213340]: traputil.c(697) 1604 %% Link on Vl643 is failed
show ip interface vlan 643
Routing interface status....................... Down
Primary IP Address............................. 172.24.64.2/255.255.240.0
Method......................................... Manual
Routing Mode................................... Enable
Administrative Mode............................ Enable
Forward Net Directed Broadcasts................ Disable
Proxy ARP...................................... Enable
Local Proxy ARP................................ Disable
Active State................................... Inactive
MAC Address.................................... D067.E595.0B1A
Encapsulation Type............................. Ethernet
IP MTU......................................... 1500
Bandwidth...................................... 10000 kbps
Destination Unreachables....................... Enabled
ICMP Redirects................................. Enabled
that really puzzling me