We're using a Dell powerconnect 8132F as a core switch, and we've got 2 different firewalls (In this example firewall1 and firewall2, each with their own internet conenctions.
Each firewall sits on a different vlan, in this example, 1 and 20. We need clients on vlan 1 to route out to the internet via firewall1, and clients on vlan20 to route out to the internet on firewall2.
Now at the moment, clients that sit on VLAN 1 are using our VLAN 1 switch IP (192.168.1.249) as the default gateway on their machines, and the switch is routing this then to firewall1 using the below command:
ip route 0.0.0.0 0.0.0.0 192.168.1.254
That works fine, clients are able to access the internet, and devices on some of our other vlans.
Now on VLAN 20, firewall2 has the IP 10.106.0.254, and the switch has 10.106.50.249, and at the moment on that VLAN, clients are using firewall 2's IP address as their default gateway.
We want the client gateway to be the switch VLAN 20 IP, and route out to the internet on 10.106.50.254.
How can we configure this?
Thanks.