Hi all,
Thanks for taking the time to look at this. I have a 6224 which was on an old version of firmware think it was 1.0.0.27 and I managed to get it to version 2.0.0.12......when I look in the graphic interface the switch has no image 2..... however it says image 2 is version 2.0.0.12 untill I select next image after reset to image 2 then it shows 14.148.70.40 ..... I also cant seem to get the latest version 3x.x.x onto the switch as it fails..... as you can see I have an error down the bottom of the following.... Do I need to completely rebuild this? Is the flash corrupted? Boot sector? If I do were are the instructions to rebuild it? Thanks for any help...
Glen
CPU Card ID: 0x508541 /DskVol// - disk check in progress ... /DskVol// - Volume is OK
total # of clusters: 15,147 # of free clusters: 10,112 # of bad clusters: 0 total free space: 20,224 Kb max contiguous free space: 11,061,248 bytes # of files: 20 # of folders: 1 total bytes in files: 10,042 Kb # of lost chains: 0 total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0xffeea80 cache block I/O descriptor ptr (cbio): 0xffeeb60 auto disk check on mount: DOS_CHK_ONLY | DOS_CHK_VERB_2 max # of simultaneously open files: 22 file descriptors in use: 0 # of different files in use: 0 # of descriptors for deleted files: 0 # of obsolete descriptors: 0
current volume configuration: - volume label: NO LABEL ; (in boot sector: ) - volume Id: 0x0 - total number of sectors: 60,716 - bytes per sector: 512 - # of sectors per cluster: 4 - # of reserved sectors: 1 - FAT entry size: FAT16 - # of sectors per FAT copy: 60 - # of FAT table copies: 2 - # of hidden sectors: 4 - first cluster is in sector # 136 - Update last access date for open-read-close = FALSE - directory structure: VFAT - root dir start sector: 121 - # of sectors per root: 15 - max # of entries in root: 240
FAT handler information: ------------------------ - allocation group size: 2 clusters - free space on volume: 20,709,376 bytes
Boot Menu Version: 20 September 2007 Select an option. If no selection in 10 seconds then operational code will start.
1 - Start operational code. 2 - Start Boot Menu. Select (1, 2):
Operational Code Date: Thu Sep 20 10:31:33 2007 Uncompressing.....
50% 100% |||||||||||||||||||||||||||||||||||||||||||||||||| Attaching interface lo0...done
Adding 46995 symbols for standalone. /DskVol// - disk check in progress ... dosChkLib : CLOCK_REALTIME is being reset to FRI APR 22 08:08:48 2005 Value obtained from file system volume descriptor pointer: 0xffc00f0 The old setting was THU JAN 01 00:00:03 1970 Accepted system dates are greater than THU DEC 27 00:00:00 1990 /DskVol// - Volume is OK
total # of clusters: 15,147 # of free clusters: 10,112 # of bad clusters: 0 total free space: 20,224 Kb max contiguous free space: 11,061,248 bytes # of files: 20 # of folders: 1 total bytes in files: 10,042 Kb # of lost chains: 0 total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0xffc00f0 cache block I/O descriptor ptr (cbio): 0xffc01d0 auto disk check on mount: DOS_CHK_ONLY | DOS_CHK_VERB_2 max # of simultaneously open files: 22 file descriptors in use: 0 # of different files in use: 0 # of descriptors for deleted files: 0 # of obsolete descriptors: 0
current volume configuration: - volume label: NO LABEL ; (in boot sector: ) - volume Id: 0x0 - total number of sectors: 60,716 - bytes per sector: 512 - # of sectors per cluster: 4 - # of reserved sectors: 1 - FAT entry size: FAT16 - # of sectors per FAT copy: 60 - # of FAT table copies: 2 - # of hidden sectors: 4 - first cluster is in sector # 136 - Update last access date for open-read-close = FALSE - directory structure: VFAT - root dir start sector: 121 - # of sectors per root: 15 - max # of entries in root: 240
FAT handler information: ------------------------ - allocation group size: 2 clusters - free space on volume: 20,709,376 bytes
Timebase: 66.666666 MHz, MEM: 266.666664 MHz, PCI: 66.666666 MHz, CPU: 533.333328 MHz SOC unit 0 attached to PCI device BCM56314_A0 Adding BCM transport pointers Configuring CPUTRANS TX Configuring CPUTRANS RX hpc - No stack ports. Starting in stand-alone mode. MonitorTask - Active DebugMonitorTask - Active
(Unit 1 - Waiting to select management unit)>Error opening the image file image2
Applying configuration, please wait ........
console>