Hello there,
I'm trying to configure LACP on a port-channel. The port-channel is configured on two stacked 8024Fs. I wil originally use this port-channel as a 10GbE uplink to a HP ProCurve 2900. However, the port-channel does not work.
dell8024f-01#show interfaces port-channel 23
Channel Ports Ch-Type Hash Type Min-links Local Prf
------- ----------------------------- -------- --------- --------- ---------
Po23 Inactive: Te1/0/23, Te2/0/23 Static 3 1 Enabled
I can't get the interface to "Active". The LACP partner (the ProCurve) is not being detected (and vice versa):
dell8024f-01#show lacp port-channel 23
Actor:
system priority: 1
system mac addr: D067.E599.4ABE
Partner:
system priority: 0
system mac addr: 0000.0000.0000
The LACP info for one port-channel prints out
port Te1/0/23 LACP Statistics:
LACP PDUs send: 0
LACP PDUs received: 0
which leads me to the conclusion that these interfaces aren't active at all. So I decided to connect the interface to another 8024Fs and the problem remains.
What am I missing? Any help appreciated, thanks.
agipd
