Dell power connect 2824 Unmanaged Behavior
When in unmanaged mode if I move my firewall from port 23 to to one of the other ports like 5 it stops communicating with the stack. do I need to reboot the switch after switching ports?do the LAG...
View ArticleSwitch off SSLv3 on Dell PowerEdge M1000e
HiCan the above be achieved? If so how? Search did not produce any results.THankKobus
View ArticleHow do I remove this code?
Hello all -Stupid question time...sorry if this seems elementary or has been asked before.I have m6220 switches in one enclosure, and a few of the ports have code applied that I believe was set up a...
View ArticleLimitation number of Secondary IP for 8132F
Hello,Did there are any limitation for number of assignment of Secondary IP for 8132F?Thanks!
View ArticlePowerConnect 8024F - port-channel configuration problem
Hello there,I'm trying to configure LACP on a port-channel. The port-channel is configured on two stacked 8024Fs. I wil originally use this port-channel as a 10GbE uplink to a HP ProCurve 2900....
View ArticleDell N2024 - NIC Teaming (LAG, LACP)
Can someone point me towards some documentation or provide the steps to how to create Team ports on the Dell N2000 series switch.I have configured a NIC Team on a Windows Server 2012 r2 server. I need...
View ArticleSPF+ and SPF compatibility Dell to HP
Hi,I am trying to connect a Dell N048 to a HP Procurve via Fiber but the link is not is not coming up. The dell is a SPF+ port and the HP is SPF port which I would imagine should be compatible. Can...
View ArticleDell PowerConnect 2824 Rebooting?
Hi,We are seeing more and more of our Dell PowerConnect 2824 switches spontaneously reboot. I would like to understand exactly under what conditions this occurs. We are using the switch in a very...
View ArticleNeed some help
Hello,I am trying to configure VRRP on a poweredge 6248. I have NLB setup with virtual IPs as well. Will VRRP still work with this?
View ArticleDell PowerConnect 5524 - Console Cable/ Help with Password
I have 2 Dell PowerConnect 5524 switches that had previous configurations done by other people. We are trying to bring them in a stacked configuration.I hit the "RESET" button on the front of the...
View ArticleN3024F SFP standart compatibility
Hi , I want to buy a switch N3024F and I need to know if it is compatible with standart SFP or DELL SFP manufacturer only ..Thanks ...
View ArticleDell Powerconnect 6224 Default VLAN and Management VLAN
Hi,two questions -1. What exactly does it mean to say the Default VLAN is not routable or VLAN 1 is not routable? I can connect to my 6224 from a different subnet and its got nothing configured except...
View ArticleAfter switch firmware update EQL is complaining of invalid configuration
After switch firmware updates the EQL is complaining of invalid configurationThe environment is completely working, but the EQL Group Manager is showing a warning that it doesn’t like the switch...
View Article8132f Ram log
Hi all,We have 2 usage 8132f Switch. That are stack. I seen Look Logs > Ram Log:broad_hpc_drv.c(4023) 1488404 %% _soc_xgs3_mem_dma: ING_VINTF_COUNTER_TABLE_X.ipipe0 failed(NAK)What is that?all 8132f...
View ArticleForce10 MXL load balancing trough port channels
Hi,Force10 MXL 10/40GbE Blade switch1) What hashing algorithms for LAG are supported in a MXL ?2) What is the default hashing mode?
View ArticleN3000 Radius Changes
Using a N3024, which had an initial config on it, I had to change radius server authentication configs. Upon changing the servers/key, I couldn't authenticate to the new servers. As this was a...
View ArticleEncrypt password inside configuration file of N3XXX or N2XXX switch?
Is there anyway to encrypt password inside the configuration file?The switch is running latest firmware. Funny point: the release note shows "Give option to encrypt TACACS and RADIUS keys" but there is...
View ArticleN2048P quivalent VOIP interface setup as Cisco 2960
Here is a Cisco 2960 configured for VOIP:interface GigabitEthernet0/1switchport access vlan 21switchport mode accessswitchport voice vlan 24What would be the equivalent on a Dell N2048P?
View ArticleN3024 and a 5424
Currently have a N3024 connected to a 5424 via 10G SFP+ trancievers. Link to main network is connected to an ethernet port on the N3024. Link light is blinking on 5424 for SFP+ port and if I connect a...
View ArticlePowerconnect 2848 - Not saving between reboots
Our Powerconnect 2848 isn't restoring certain settings after a reboot. I change the time and date in the web GUI, restart the switch, and the time/date reverts back to Jan 1 2000.Likewise, I change a...
View Article