Hi I´m ussing a powerconnect 6224, I have an equipment that works as a switch and it has two ports bonded with LACP, when I connect this equipment to the POWERCONNECT and send a ping there is no responce, whoever with a laptop connected to that port the ping is answered. Can you help with this topic?. Here is the POWERCONNECT's configuration. Thanks in advance.
console(config)#interface vlan 32
console(config-if-vlan10)#ip address 10.163.101.4 255.255.255.252
console(config-if-vlan10)#routing
console(config)#interface ethernet 1/g3
console(config-if-1/g1)#switchport mode general
console(config-if-1/g1)#switchport general allowed vlan add 31
