Is NAT possible using a PC 7048
Can I NAT to a site that lies across an MPLS link that only carries certain subnets?Our MPLS currently carries 172.16 traffic which is routed by the PC 7048 (5.1.0.1 VxWorks 6.6)We have added a couple...
View ArticleBrocade 4424
Does anybody know how to clear the root user on a Brocade M4424 switch for the M1000e? I got a hold of Brocade support, but they said I must contact Dell to clear the root user. I've got 3x of the...
View ArticleDell Openmanage Network Manager 5.3 stopped collecting data
Hello all,we have a Dell Openmanage Network Manager version 5.3 installed on a Windows 2008 R2 Server, which suddenly stopped to collect data from the devices that we have configured when we installed...
View ArticleStacking Port Usage on 3448
I have a pair of 3448's in the rack along with a 6248. I am using the 6248 as my core L3 switch.I have had the 3448's going back to the 6248 using port 47 as a trunk. Since the ports are all 10/100, I...
View Articleavoid switch become as root
I have strange issue. our all switches are PC62XX with firmware 3.3.11.2. we have existing network switches and working fine now we added another switches for our new development environment. but issue...
View ArticlePowerConnect2848 MAC Address Filtering
In the 35xx series there is a way to lock a port to a specific MAC Address.I am trying to find a way to do something similar with a 2848, but cannot figure it out.Is this only possible if I am using a...
View ArticleLACP-LAG POWERCONNECT 6224
Hi I´m ussing a powerconnect 6224, I have an equipment that works as a switch and it has two ports bonded with LACP, when I connect this equipment to the POWERCONNECT and send a ping there is no...
View Articledell powerconnect 2848 trunking
I have a 2848 switch for which i am unable to make trunk working. I have tagged the port 48 with T for all the VLANS to make it a trunk except for VLAN 1 which has a U on that port by default . the...
View ArticleCan't get CLI response on Powerconnect 7048p
I just got a 7048p put in my lap to setup for a project. I don't know the entire previous history of the unit - so I powered it on - plugged a few cables into it to see if it would pass traffic (it...
View ArticlePower connect 6224 stack problem
Hi Guys,I have similar problem as andycrisp had in subject ' Issues with 4 stacked 6248's '. I have 2 stacked switches 6224. Normally everything works fine. But during peak I can't log in to switch in...
View Article2 Vlans on same port for the same server (Public Ips) Dell 6248
Hey,I have a dell6248 switch and I am having issues assigning 2 vlans with public ip ranges to the same port for a server.I tried enabling trunk mode which allowed me to assign both but it stopped all...
View ArticleChanging management VLAN
Hi,Currently we have have a few switches that have management VLAN assigned to VLAN 1 interfaces which we connect to them via SSH. I have created a new a new VLAN for management and can ping all of the...
View ArticleConnect 6248 and 2848 using LAG
I have 2 x 6248 stacked and almost out of ports. Just purchased a 2848 recently. Wanted to connect to the 6248 as 4 ports LAG. Need help. Thanks.
View Article5548 DHCP Relay, Offer doesn't appear to route back
5548 with voip currently running. There is a DHCP server running on the same subnet. We are trying to test DHCP Relay and set up a separate VLAN. From what we can tell by snooping the traffic is...
View Articleattempting to update firmware from 10...15 to 10...16 on powerconnect 5548...
Hello,this may not be a big issue, however when we try to update our switches to 10.0.16 from 15 ...we don't see the file name change and the sizes appear to match exactly with .15. We recently did a...
View ArticleR1-2401 with firmware 2.0.0.46
I have a VRTX server and had recently updated the R1-2401 switch to the firmware 2.0.0.46. When the switch is at this firmware level the ports gi2/1 and gi2/2 (server slot-2 ports) are in the down...
View ArticleM8024K not responding serial port
I have two switches 8024kinstalled on a Dell Chassis and I need to change the out-of-band IP.1.- Via Chassis CMC GUI I can see t the IPs of the switches but they are grey out.2.- when I tray to...
View ArticleBACS4 Broadcom or QLogic? - where is latest?
I'm running a five node 2012 R2 Hyper-V cluster with Broadcom 10G networking and NPAR in play. Each node has BACS4 v 16.4.3.0 installed to manage the NIC configs. I can also manage these NICs using...
View ArticlePowerconnect 7048P - Can I turn on / off POE?
This is a noob question. We are looking to purchase a switch to replace our current 7024. The 7048P is what we are looking for since it has double the ports and provides POE. My question is can we turn...
View ArticleN3024 inter-switch vLan routing
Hi, Apologies if this is a stupid question, but I have a client with 3 geographically separate sites who wants to have an N3024 at each site and also have them talk to each other. These switches each...
View Article