Am hitting this problem for the second time now that ports seem to lock up and am unable to revover them by shut/no shut. Only means to recover the ports seems to be
through rebooting the switch. Clients are Dell and HP computers and no BPDU device known to have caused this although the port should be recoverable anyway.
Anyone know of this problem and what means to recover the ports ?
Re
Kjartan
Port Type Duplex Speed Neg ctrl State Pressure Mode
-------- ------------ ------ ----- -------- ---- ----------- -------- -------
gi1/0/1 1G-Copper Full 1000 Enabled On Up Disabled Off
gi1/0/2 1G-Copper Full 1000 Enabled On Up Disabled On
gi1/0/3 1G-Copper Full 1000 Enabled On Up Disabled On
gi1/0/4 1G-Copper Full 1000 Enabled On Up Disabled Off
gi1/0/5 1G-Copper -- -- -- -- Down* -- --
gi1/0/6 1G-Copper -- -- -- -- Down* -- --
gi1/0/7 1G-Copper -- -- -- -- Down* -- --
gi1/0/8 1G-Copper -- -- -- -- Down* -- --
gi1/0/9 1G-Copper -- -- -- -- Down* -- --
gi1/0/10 1G-Copper -- -- -- -- Down -- --
gi1/0/11 1G-Copper Full 1000 Enabled On Up Disabled Off
interface gigabitethernet1/0/5
description PC-VLAN-244
spanning-tree portfast
spanning-tree guard root
spanning-tree bpduguard enable
switchport access vlan 244
Unit SW version Boot version HW version
------------------- ------------------- ------------------- -------------------
1 4.1.0.16 1.0.0.14 00.00.02