HSRP configuration on PowConn 5548

Hi,

I need some help to know if what I'll do make sense or not.

An ISP installed 2 cisco routers with the HSRP protocol. I want to configure on the same vlan and switch, the 2 routers, a firewall and another machine in the future.

Cisco Router 1 <-------HSRP IP=GATEWAY------->Cisco Router 2

The 2 routers connected to :

PowerConn5548 VLAN 10 with General 10U ports :

Connect to the Firewall with also General 10U port.

I'll Use the HSRP IP as a gateway and a Public IP on the firewall, and after that nating other Public IPs through the firewall. I don't have any IP configured in the VLAN configuration.

Thanks for the help.