Hi :)
I have DHCP server on Win2012R2. where i have three scope.
On PC6248 create 3 vlans (10, 20, 30) and add ip address, but when connet work stacion to any vlan's port get IP like 169.254.X.X
Where i do mistake?
schema what i want do:
Image may be NSFW.
Clik here to view.
console#show running-config
!Current Configuration:
!System Description "PowerConnect 6248, 3.3.5.5, VxWorks 6.5"
!System Software Version 3.3.5.5
!Cut-through mode is configured as disabled
!
configure
vlan database
vlan 10,20,30
vlan association subnet 10.111.10.0 255.255.255.0 10
vlan association subnet 10.111.20.0 255.255.255.0 20
vlan association subnet 10.111.30.0 255.255.255.0 30
exit
sntp unicast client enable
sntp server 10.0.0.4
sntp server 10.0.0.3 priority 2
clock timezone 2 minutes 0 zone "waw"
stack
member 1 2
exit
ip address 10.111.1.20 255.255.255.0
ip default-gateway 10.111.1.1
username "admin" password 2e801e65dfc0ed17ff104628b6cddbb8 level 15 encrypted
dhcp l2relay
dhcp l2relay vlan 1,10,20,30
!
interface ethernet 1/g2
switchport mode trunk
switchport trunk allowed vlan add 1,10,20,30
exit
!
interface ethernet 1/g9
switchport access vlan 10
exit
!
interface ethernet 1/g10
switchport access vlan 10
exit
!
interface ethernet 1/g11
switchport access vlan 10
exit
!
interface ethernet 1/g12
switchport access vlan 10
exit
!
interface ethernet 1/g13
switchport access vlan 20
exit
!
interface ethernet 1/g14
switchport access vlan 20
exit
!
interface ethernet 1/g15
switchport access vlan 20
exit
!
interface ethernet 1/g16
switchport access vlan 20
exit
!
interface ethernet 1/g17
switchport access vlan 30
exit
!
interface ethernet 1/g18
switchport access vlan 30
exit
!
interface ethernet 1/g19
switchport access vlan 30
exit
!
interface ethernet 1/g20
switchport access vlan 30
exit
exit