I work for a non-profit and a local company donated a S25N switch to us, but it does not boot. The following is the boot sequence, which seems normal up to around line 41. I tried pressing various keys to get the boot menu, but that does not work. I just get gibberish from the key presses. Any suggestions?
U-Boot 1.1.4 (F10 Development) (Jun 2 2009 - 04:34:03)
Built by garumugasamy at davinci on Tue Jun 2 4:33:57 2009
S-Series Boot selector Label 2.8.1.2
CPU: 8541, Version: 1.1, (0x807a0011)
Core: E500, Version: 2.0, (0x80200020)
Clock Configuration:
CPU: 660 MHz, CCB: 330 MHz,
DDR: 165 MHz, LBC: 41 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: S50 Force10 Networks
Watchdog enabled
DRAM: Initializing
DDR: 256 MB
Top of RAM usable for U-Boot at: 10000000
Reserving 122k for U-Boot at: 0ffe0000
Reserving 136k for malloc() at: 0ffbe000
Reserving 76 Bytes for Board Info at: 0ffbdfb4
Reserving 72 Bytes for Global Data at: 0ffbdf6c
Stack Pointer at: 0ffbdf48
New Stack Pointer is: 0ffbdf48
Now running in RAM - U-Boot at: 0ffe0000
L2 cache 256KB: enabled
Using default environment
PCI Scan: Found Bus 0, Device 23, Function 0
In: serial
Out: serial
Err: serial
U-Boot relocated to 0ffe0000
Net: No ethernet found.
### main_loop entered: bootdelay=1
### main_loop: bootcmd="bootm 0xffe80000;setenv verify no;autoscr 0x1700000
bootm fe6000f0"
Hit any key to stop booting: 0
=>
=>
=>
=> U-Boot 1.1.41>>>> U-Boot 1.1.41>>>> U-Boot 1.1.41>>>> U-Boot 1.1.41>>>> U-Boo
t 1.1.41>>>> U-Boot 1.1.41>>>> U-Boot 1.1.41>>>> U-Boot 1.1.41>>>> U-Boot 1.1.41
>>>> U-Boot 1.1.41>>>> U-Boot 1.1.41>>>> U-Boot 1.1.41>>>> U-Boot 1.1.41>>>> U-B
oot 1.1.41>>>> U-