Hi,
We recently upgraded our network switches in M1000E enclosure to DELL MXL, but switch display port speed for internal ports as 1G not 10G
- nl-sw5#sh int status
- Port Description Status Speed Duplex Vlan
- Te 0/1 d5166 DELL Up 1000 Mbit Full 65
- Te 0/2 d5166 DELL Up 1000 Mbit Full 65
- Te 0/3 d5166 DELL Up 1000 Mbit Full 65
- Te 0/4 d5166 DELL Up 1000 Mbit Full 65
- Te 0/5 d5166 DELL Up 1000 Mbit Full 65
- Te 0/6 d5166 DELL Up 1000 Mbit Full 65
- Te 0/7 d5166 DELL Up 1000 Mbit Full 65
- Te 0/8 d5166 DELL Up 1000 Mbit Full 65
Switch version:
Dell Real Time Operating System Software
Dell Operating System Version: 2.0
Dell Application Software Version: 9.5(0.1)
Copyright (c) 1999-2014 by Dell Inc. All Rights Reserved.
Build Time: Thu Jul 31 21:20:08 2014
Build Path: /sites/eqx/work/swbuild01_1/build01/E9-5-0/SW/SRC
Dell Networking OS uptime is 1 day(s), 15 hour(s), 58 minute(s)
System image file is "system://A"
System Type: MXL-10/40GbE
Control Processor: MIPS RMI XLP with 2 Gbytes (2147483648 bytes) of memory, cores(s) 1.
256M bytes of boot flash memory.
2 34-port GE/TE/FG (XL)
88 Ten GigabitEthernet/IEEE 802.3 interface(s)
4 Forty GigabitEthernet/IEEE 802.3 interface(s)
M620 Blade FW versions:
Integrated Dell Remote Access Controller 2.21.21.21
Intel(R) Ethernet 10G 2P X520-k bNDC - 15.0.28
Intel(R) Ethernet 10G 2P X520-k bNDC - 15.0.28
BIOS 2.5.2
PERC H310 Mini 20.13.1-0002
BP12G+ 0:1 1.00
Lifecycle Controller 2.21.21.21
Dell 64 Bit uEFI Diagnostics, version 4247, 4247A1, 4247.2 4247A1
Dell OS Driver Pack, 15.07.07, A00 15.07.07
OS COLLECTOR 1.1, OSC_1.1, X10-00 OSC_1.1
System CPLD 1.0.7
Please help to change port speed to 10G.
Thank you.
Kind regards,
Aytugan.