Enabling BPDUGuard on Portfast ports for a N series switch
I'm trying to enable BPDUGuard on ports that are currently setup as Portfast on an N2048P switch. How might I be able to enable this?Regards.
View Articlex1052p - Console Drivers / Connect to Term Server
Hey everyone - very long time Dell customer first time poster (always seemed to be able to find answers until now).I just got a Dell X1052p Switch and it comes with a Micro USB to USB Console Cable, I...
View ArticleDELL MXL sees internal blades NICs as 1G not 10G
Hi,We recently upgraded our network switches in M1000E enclosure to DELL MXL, but switch display port speed for internal ports as 1G not 10Gnl-sw5#sh int statusPort Description Status Speed...
View ArticleN2000 mst, bpdu
We running spanning tree mst. Our typical access layer port config looks like this: spanning-tree portfastspanning-tree guard rootswitchport access vlan 10However, when a cable was plugged into two...
View ArticleConnecting 2 N4032 Switches on 2 Rack
Hi, I have 2 N4032 switches installed on separate server racks.They are inter-connected on Port 23 and 24. Servers in Rack1 can ping Switch1, Servers in Rack2 can ping Switch2. However, they cannot...
View ArticleN4032 switch ports occasionally go "link down" for a few seconds?
We have a N4032 switch used for a vSAN environment. Right now we only have 4 ESXi host connected to it ( 8 ports ). all the switch ports are configured as auto:show interfaces statusPort Description...
View ArticleOMNM authentication issue with 6.2.6.6 and above
on my test N2048P I have update the os to 6.2.2.6 and 6.2.7.2 and when I try to add it to OMNM I get issues with both ssh and https authentication. All my other switches can be deleted and added with...
View ArticleClocks on N3048
Is there a way to manually adjust the clock on the switch, the only reason I ask is because I have 3 switches, all N3048's and we use an NTP server so one of the switches I was able to just add the NTP...
View ArticleStatic routing on N2000 series
Switch A is a N2048p with vlan 2 as the access/management vlan for routing traffic. vlan 3 is unique to the switch and I am trying to using static routing rules to pass traffic to and from Switch B (a...
View Articleconfiguration download
Can I copy (tftp, scp) the N3048 switch config to a remote server while being logged on to the OOB interface?Syslog and NTP client running on the N3048 switch works fine, NTP en syslog server are both...
View ArticleSpanning Tree Issues on Powerconnect 7048P
Hello Experts,I have two Powerconnect 7048P switches in a stack (via stacking modules and cables). I have two 10GB uplinks (one from each switch) to the firewall (one firewall). The firewall does not...
View Article10 mb on dell 5548
Few of the ports are negotiating to 10 mb speed however if I change the port for the user system it negotiate to normal 1 gig. so its nothing on computer side.Gigabit Ethernet...
View ArticleTrying to Nullify packets inside a PC6248 redirected from an s4810 vlt pair....
Hello Guys,I’ve been tasked to finish the Nullification of redirected packets. I’ve been trying different things but to no avail…. packets get to machines not listed on the permit list...I’ve included...
View ArticleIP steal prevention on force10 MXL 10/40Gb switches
Hello Guys,I have four MXL switches which are connected as one stack, switches are connected to ESX hosts using PVLAN and my problem is with virtual servers which are in the same network and every...
View Articlepower connect 8024F and sport
HiI am testing a Palo Alto device and I am trying to configure up a span port on the 8024f I have.This port needs to see all the traffic on the switchI can't use mirror port as is only mirrors 1 port...
View ArticlePowerConnect 3254 seems partially dead; warranty policy?
Hello,We have a PowerConnect 3254 which has served us well for many years. Yesterday, our entire network (we're a small company) was shutdown as the switch appeared to be culprit; everybody appeared to...
View ArticleClik here to view.
N2048P Switch CLI issues.
Hello,I got the documentation about setting up our network switch, I was able to get the IP setup for the switch, but I am having issues creating the admin user account to level 15. Right now the...
View Articleip igmp snooping non-operational on M8024-k blade switch
We've got an M8024-k switch installed in our Dell blade chassis. I'm trying to get igmp snooping to work on a VLAN without much success. Software version appears to be 5.1.5.1. Commands described in...
View ArticleL3 Inter Vlan Routing -- No Internet Access
Hello all,My first post to the Dell Community. I have been configuring some Dell 6224 backbone switches to do the inter VLAN routing, instead of having the Sonicwall do it. I've reached a point where...
View ArticleN Series Policy Based Routing - Two DIAs
Hello all,The scenario is, I need to offload the user and guest user internet traffic to a secondary dia while maintaining the current DIA for all other VLANs and subnets.It looks like PBR is the...
View Article