Hi,
I've been given the task of setting up a simple colocation but my knowledge of setting up managed switches is a little limited.
I've been given the below IP info by a single network drop into a rack.
Public IP - 1
Public IP - 2
Public IP - 3
Gateway - 1
Subnet mask 255.255.255.248
Current server setup in the rack.
Linux Server 1 with Public IP - 2
Linux Server 2 with Public IP - 3
My aim is to setup the Dell N2024 so that the network drop connects to the switch and then can pass traffic to the servers.
My thought was to setup the switch with a private address for example.
IP - 10.10.10.1
Gateway - 0.0.0.0
Subnet mask 255.255.255.0
Then setup a vlan for the three public IP's above.
Is this the correct way to complete this task?
It seems simple enough but i'm being thrown into it with no guidance so some steps or advice is welcome.
Thanks