Hi all,
I receive today a new switch N1548P and during the first start I have the following error :
UBIFS: mounted read-only
UBIFS: file system size: 107802624 bytes (105276 KiB, 102 MiB, 849 LEBs)
UBIFS: journal size: 5459968 bytes (5332 KiB, 5 MiB, 43 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 5182151 bytes (5060 KiB)
/image2 not found!
ubifsload - load file from an UBIFS filesystem
Usage:
ubifsload <addr> <filename> [bytes]
- load file 'filename' to address 'addr'
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x160000 -- 100% complete.
Writing to Nand... done
/image1 not found!
ubifsload - load file from an UBIFS filesystem
Usage:
ubifsload <addr> <filename> [bytes]
- load file 'filename' to address 'addr'
Wrong Image Format for bootm command
ERROR: can't get kernel image!
u-boot>
I'm scared the kernel is corrupt.
Can you help me, please ? I receive a second 1548P which work.
Best Regards
,
Richard.