SSH on a PowerConnect 7024
Is there a way to disable SSH v1 on a PowerConenct 7024, while leaving SSH v2 enabled?
View ArticleNSeries Console Password
I am having trouble setting a password so that when I console in through the serial cable, I am prompted with a passwordI do not mean the ENABLE password which I can get working OK.
View ArticleUNKN[112661328]: macal_api.c(844) 385166 List does not exist.
why I am getting this alert message from all my Dell PC6248 switches.2/21/2017 9:09:03 AM172.21.110.4Informational172.21.110.4-1 UNKN[112661328]: macal_api.c(844) 385166 List does not exist.2/21/2017...
View ArticleDell X1052 has no community ports?
We want to configure a Dell X1052 switch with private VLANs. The GUI has Port Mode options for Promiscuous and Isolated ports, but not community ports. Is this a feature that is lacking in the X1052...
View ArticleCannot Console to S4048-on
I am unable to get serial console connection to this model switch. I have tried 2 seperate switches with 2 seperate cables. Using 115200/8/none/1/ no flowAlso tried 115200/8/none/1/ no flowThis has...
View Articlestrange problem with traffic policing - PowerConnect 5548
Hi,We're experiencing a somewhat bizarre issue. I'll try to lay it out as clearly as possible.We have a 8-member PowerConnect 5548 stack - 4 PoE units and 4 non-PoE units. This stack is uplinked to two...
View ArticleConnect PowerConnect 6248 and Force10 S4810
Hi,I have two PowerConnect 6248 Switches connected with Stacking. Now I want to connect a Force48 S4810 Switch on the same network.Both 6248 have an SFP + module.What is the best way to connect?Thanks.
View ArticleNew N1548p u-boot Menu First start
Hi all,I receive today a new switch N1548P and during the first start I have the following error :UBIFS: mounted read-onlyUBIFS: file system size: 107802624 bytes (105276 KiB, 102 MiB, 849 LEBs)UBIFS:...
View Articlex1026 trunked with Cisco 3750
This is embarrassing. I have multiple Cisco switches at work and home. I have worked with Dell PowerConnects for years. However, this x1026 is kicking my piehole. I need to setup a quad port trunk...
View ArticleN3024P Combo port SFP connected to SFP port on N2024P comes up in D-DOWN...
We have 5 N-series switches across various data rooms at one of our sites. In the main server room we have an N3024P (two switches come into the two SFP ports, Te1/0/1 and Te1/0/2), and an N2024P (one...
View ArticleDell PowerConnect M6220 Blade Switch - Remove Switch From Stack
Hello, Everyone.We have 3 Dell PowerEdge M1000e Chassis that each have four M6220 switches in them (A1, A2, B1, & B2). Each set of switches is stacked amongst the 3 chassis creating a stacking loop...
View ArticleTrunk between 6248 and 8132
Hi,I have a trunk port between 6248 and 8132 with general mode. Please see the interface configuration below:6248:interface ethernet 1/xg1description 'xxxxx'switchport mode generalswitchport general...
View ArticleConnecting Cisco 7937 conference station to Dell 5524P
I am trying to connect a Cisco 7937 Conference phone to a Dell 5524P. It gets power but I cannot get the phone to register. When I plug it into a cisco Switch on the same network, it works fine. I...
View ArticleOpen Manage Network Management / stacked switches
Hi,Two questions.1. I have a stack with 2*N3048. I can see the details of the master switch (service tag, serial ...), but not for the other switch. Where can I find them ?2. How configure monitor to...
View Articleinternet speed powerconnect 2724
We recently upgraded our internet service through Comcast. When my computer is connected directly to the modem, and nothing else is connected to the modem, we get full-speed upload and download as...
View ArticleHow to disable TFTP from Dell switch
I have a 3048 and a couple 4810s and I want to disable the TFTP function. Client and Server. Is there a way to do this via CLI configs? Note: I do not wish to block TFTP traffic I want to stop the...
View ArticleClik here to view.
Problem between vlans
Hi,I'm working with a hybrid cloud and between the two sites I have an Ethernet Line, so we can have the same IP class.At my site, there is a Router that receives packets from the cloud with VLAN 10....
View ArticleX1026 set up
I'm having a fiddle with our system and putting in an X1026 as a test before we use more.I've gotten it into managed mode and logged on but working through the set up wizard the final option to finnish...
View ArticleDell N4064f DCB setup for SMB
HelloWe are having a big problem enabling Datacenter Bridging for SMB traffic for Storage Spaces Direct.This is the commands we runconf tclassofservice traffic-class-group 0 1classofservice...
View Article"Unable to submit Service Tag for a Dell PowerConnect 5548"
Attempting to lookup product support (pull warranty data/update firmware) for a Dell PowerConnect 5548 w/ an ST of HSZ40Z1 and am receiving an error that states "There is no match for that Service Tag...
View Article