Clik here to view.
Simulating Dell FTOS with GNS3 on MAC device
Hello,I am trying to simulate Dell on GNS3 and after all I have a issue with VNC. Did you check this issue before?Best regards,
View Article[N20XX] RADIUS Server usage login does not work
Hello,we are already using dot1x and want to add management access by SSH to the switches based on RADIUS authentication. As you can see in the configuration below, I want to use a different RADIUS...
View ArticleN2000 Routing Options
I understand the N2000 series has limited L3 routing options. I wanted to explore if any of those options might solve my problem. I simply want to divert all traffic going to a specific internal...
View ArticleN4032F failover link
HiIs it possible to have 2 ports on a switch that port 1 is the primary path to the gateway and port 2 is to a secondary path. I need them to auto failoverAny Help would be greatthks
View ArticleClik here to view.
N2048 Problem with TACACS
Hi,Please help me. My Dell N2048p Switch don't send query to TACACS server.I set up TACACS Server with TACACS.net on Windows Server 2008 and config Dell N2048 to use TACACS for SSH Authentication. But...
View ArticlePowerConnect 6248P triple stack / No link lights on the second or third switches
The switches turn on, they seem to stack correctly. Master #1, #2, #3.I can log in and they all show up. All the firmware is the same.I had to update a few of them from an older version and use telnet...
View ArticleDell N3048P VLAN ACL
Greetings everyone,I'm currently demoing the N3048P switch as a possible replacement for my edge access switches for the school district I work in. Currently I am running Avaya ERS 5600's which are...
View ArticleDell Networking N3024 and Dell Networking N2024P Trunking using GUI.
I am new here for using dell. I have Mikrotik CCR1036 Connected to Internet, I have a Dell Networking 3024, Then I have 5 Dell Networking N2024P deploying In each floors. I also have 20 Dell Networking...
View ArticleFirst time setting up VLANs across interconnected N5000 & N3000 switches,...
At my company, we have a stack of PowerConnect N3000 switches for our core (stacked with mini-sas cables in the back) and then they connect to switches in various closets throughout the building via...
View ArticleN2000 Error message ? broad_hpc_drv.c(4429) 28494 CACHE_RESTORE:...
Hi, had this error on a N2000 we have it connected to a few physical servers an M1000e(using M6220s with HV) and a couple of Equilogics. (so can't easily reload it)Appeared out of the blue and has...
View ArticleMultiple Class C networks and matching VLANS for routing
I have a customer that has (2) S4048T-ON Dell switches and several smaller layer 2 switches connected to it . The customer wants to create the following scenario using his gear. I haven't done it...
View ArticleIssues with LAG across N4032 Switch Stack
I have had issues with stacking 2 N4032's. First issue was the slave switch would disconnect and stop responding after 8 hours or so. I applied firmware version 6.3.1.13 which appears to have solved...
View ArticleClik here to view.
VoIP QoS
Hi,I have just installed a DELL N4032 into our environment to act as a L3 switch to route VoIP traffic from a voice VLAN to a data VLAN where the PBX is located. The VoIP and data traffic are directly...
View ArticleSimple home network with Power Connect 3348
We have about 8 - 9+ computers in our household (shop pc, mine and my brothers bedroom pc and consoles, kitchen, my 2 game development pcs, music production pc, 3D animation workstations and my dads...
View Articleon logging server logs not showing up with hostname for Dell switches
Hi,I hope you can assit with the followingwith our dell switches logs are not showing up with hostname on our logging server.Do we have simillar command like origin id (witch cisco) switches where...
View ArticlemacalRuleActionGet in the log files
We created a access management rule on our switch to prevent in-band management, and since then we are getting a lot of the following log entries:<189> Mar 8 11:17:48 DenCoreSW01-1...
View Articlepowerconnect configuration , heartbeat issue
Hi All,Currently i'm working in big project we have two blade chassis (switch powerconnect), PowerEdge M360 server, connected to TOR DEll switch by external port of powerconnect switch.from the server...
View Articlepowerconnect configuration , heartbeat issue
Hi All,Currently i'm working in big project we have two blade chassis (switch powerconnect), PowerEdge M360 server, connected to TOR DEll switch by external port of powerconnect switch.from the server...
View ArticleTrunking between two powerconnect 6248 switches
I am new to Dell switches We are connecting two 10GB SFP+ ports to pass traffic between our two switches.The settings on these switches are as follows:interface ethernet 1/xg2spanning-tree portfastmtu...
View ArticleN4000 for iSCSI with mixed MTU's
Hi community.I have 2 Stacked N4000 switches, an equallogic SAN and R730 servers.I am planning to use half of the N4000 for iSCSI traffic and the other half for normal network operations.Is it possible...
View Article