I have a DELL PowerConnect 2824.
I am attempting to set up VLANS and use the switch with a router-on-a-stick configuration.
My pfsense router has one NIC with 2 VLANs; VLAN5(WAN) and VLAN55(LAN)
On the DELL 2824 I created 2 VLANS, VLAN5(WAN) and VLAN55(LAN)
VLAN5 has 2 ports 1 and 7. Port 1 is Untagged and port 7 is Tagged. Ports 2,3,4,5,6,and 8 are not used. Ports 1-7 have PVID of 5.
VLAN55 has ports 9-23, all Untagged and port 7 is Tagged. Ports 9-23 have PVID of 55.
I can communicate with the pfsense LAN connection on 7 from any port 2-23.
When I connect my cable modem to port 1 and the pfsense router to port 7 I do not get an IP from DHCP from the cable company.
I'm sure there is some setting on the 2824 I am missing. I can connect everything to a Netgear managed switch withe the same configuration and everything works fine.
Your help would be appreciated.
