Hello everyone I hope someone can help me with a problem I have. I have 4 power connect 6224's and have recently wanted to apply the must current firmware of 3.3.6.4 to all 4 switches. I had no problem upgrading 3 of the switches to the new firmware. But one of my switches will not allow me to upgrade to the newest firmware 3.3.6.4. I have followed the instructions included with the firmware to the letter and had no problems with the other three switches. I have included the out put after I tftped the image to the switch. I know the firmware is not corrupt since it is the same file that has worked fine on the other 3 switches. I also have tried walking it up to the latest version but each version I try fails in the same manner. I would appreciate any help. I keep going over it and I seem to be covering everything.
Images currently available on Flash
--------------------------------------------------------------------
unit image1 image2 current-active next-active
--------------------------------------------------------------------
1 3.2.0.10 3.3.6.4 image1 image1
console>enable
console#boot system image2
Activating image image2 ..
console#update bootcode
Update bootcode and reset (Y/N)?
Issuing boot code update command...
Validating boot code from image...CRC Valid.
Boot Menu 3.2.0.10
CPU Card ID: 0x508541
/DskVol// - disk check in progress ...
/DskVol// - Volume is OK
total # of clusters: 15,147
# of free clusters: 5,514
# of bad clusters: 0
total free space: 11,028 Kb
max contiguous free space: 10,813,440 bytes
# of files: 23
# of folders: 1
total bytes in files: 19,239 Kb
# of lost chains: 0
total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0x3902d50
XBD device block I/O handle: 0x10001
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode: copyback (DOS_WRITE)
max # of simultaneously open files: 52
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: NO LABEL ; (in boot sector: )
- volume Id: 0xaf
- total number of sectors: 60,716
- bytes per sector: 512
- # of sectors per cluster: 4
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 60
- # of FAT table copies: 2
- # of hidden sectors: 4
- first cluster is in sector # 136
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- file name format: 8-bit (extended-ASCII)
- root dir start sector: 121
- # of sectors per root: 15
- max # of entries in root: 240
FAT handler information:
------------------------
- allocation group size: 2 clusters
- free space on volume: 11,292,672 bytes
Boot Menu 3.2.0.10
Select an option. If no selection in 10 seconds then
boot code will be updated.
1 - Update boot code.
2 - Start Boot Menu.
Select (1, 2):1
validating image2....OK
Extracting boot code from image...CRC valid
Erasing Boot Flash.....^^^^Done.
Wrote 0x10000 bytes.
Wrote 0x20000 bytes.
Wrote 0x30000 bytes.
Wrote 0x40000 bytes.
Wrote 0x50000 bytes.
Wrote 0x60000 bytes.
Wrote 0x70000 bytes.
Wrote 0x80000 bytes.
Wrote 0x90000 bytes.
Wrote 0xa0000 bytes.
Wrote 0xb0000 bytes.
Wrote 0xc0000 bytes.
Wrote 0xd0000 bytes.
Wrote 0xe0000 bytes.
Wrote 0xf0000 bytes.
Wrote 0x100000 bytes.
Validating Flash.....Passedý
Boot Menu 3.3.6.4
CPU Card ID: 0x508541
/DskVol// - disk check in progress ...
/DskVol// - Volume is OK
total # of clusters: 15,147
# of free clusters: 5,514
# of bad clusters: 0
total free space: 11,028 Kb
max contiguous free space: 10,813,440 bytes
# of files: 22
# of folders: 1
total bytes in files: 19,239 Kb
# of lost chains: 0
total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0x3903150
XBD device block I/O handle: 0x10001
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode: copyback (DOS_WRITE)
max # of simultaneously open files: 52
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: NO LABEL ; (in boot sector: )
- volume Id: 0xaf
- total number of sectors: 60,716
- bytes per sector: 512
- # of sectors per cluster: 4
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 60
- # of FAT table copies: 2
- # of hidden sectors: 4
- first cluster is in sector # 136
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- file name format: 8-bit (extended-ASCII)
- root dir start sector: 121
- # of sectors per root: 15
- max # of entries in root: 240
FAT handler information:
------------------------
- allocation group size: 2 clusters
- free space on volume: 11,292,672 bytes
Boot Menu 3.3.6.4
active image failed crc check. activating backup image
Backup image - image1 activated.
Select an option. If no selection in 10 seconds then
operational code will start.
1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):
Operational Code Date: Mon Nov 15 17:22:40 2010
Uncompressing.....
Adding 0 symbols for standalone.
CPU: Motorola E500 : Unknown system version. Processor #0.
Memory Size: 0x10000000. BSP version 1.2/0.
Created: Nov 15 2010, 17:08:12
ED&R Policy Mode: deployed
/DskVol// - disk check in progress ...
dosChkLib : CLOCK_REALTIME is being reset to FRI APR 22 12:11:28 2005
Value obtained from file system volume descriptor pointer: 0x3533cb0
The old setting was THU JAN 01 00:00:00 1970
Accepted system dates are greater than THU DEC 27 00:00:00 1990
/DskVol// - Volume is OK
total # of clusters: 15,147
# of free clusters: 5,514
# of bad clusters: 0
total free space: 11,028 Kb
max contiguous free space: 10,813,440 bytes
# of files: 22
# of folders: 1
total bytes in files: 19,239 Kb
# of lost chains: 0
total bytes in lost chains: 0
volume descriptor ptr (pVolDesc): 0x3533cb0
XBD device block I/O handle: 0x10001
auto disk check on mount: DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode: copyback (DOS_WRITE)
max # of simultaneously open files: 52
file descriptors in use: 0
# of different files in use: 0
# of descriptors for deleted files: 0
# of obsolete descriptors: 0
current volume configuration:
- volume label: NO LABEL ; (in boot sector: )
- volume Id: 0xaf
- total number of sectors: 60,716
- bytes per sector: 512
- # of sectors per cluster: 4
- # of reserved sectors: 1
- FAT entry size: FAT16
- # of sectors per FAT copy: 60
- # of FAT table copies: 2
- # of hidden sectors: 4
- first cluster is in sector # 136
- Update last access date for open-read-close = FALSE
- directory structure: VFAT
- file name format: 8-bit (extended-ASCII)
- root dir start sector: 121
- # of sectors per root: 15
- max # of entries in root: 240
FAT handler information:
------------------------
- allocation group size: 2 clusters
- free space on volume: 11,292,672 bytes
Timebase: 66.666666 MHz, MEM: 266.666664 MHz, PCI: 66.666666 MHz, CPU: 533.33332
8 MHz
PCI unit 0: Dev 0xb314, Rev 0x01, Chip BCM56314_A0, Driver BCM56314_A0
SOC unit 0 attached to PCI device BCM56314_A0
Adding BCM transport pointers
Configuring CPUTRANS TX
Configuring CPUTRANS RX
hpc - No stack ports. Starting in stand-alone mode.
Instantiating /download as rawFs, device = 0x20001
Formatting /download for DOSFS
Instantiating /download as rawFs, device = 0x20001
Formatting.../download: file system is marked clean, skipping check
OK.
<186> APR 22 12:11:33 0.0.0.0-1 UNKN[268434720]: bootos.c(233) 1 %% Event(0xaaaa
aaaa)
Instantiating RamCP: as rawFs, device = 0x30001
Formatting RamCP: for DOSFS
Instantiating RamCP: as rawFs, device = 0x30001
RamCP:/ - disk check in progress ...
RamCP:/ - Volume is OK
total # of clusters: 1,975
# of free clusters: 1,973
# of bad clusters: 0
total free space: 1,010,176
max contiguous free space: 1,010,176 bytes
# of files: 0
# of folders: 0
total bytes in files: 0
# of lost chains: 0
total bytes in lost chains: 0
OK.
(Unit 1 - Waiting to select management unit)>
Applying Interface configuration, please wait ...
console>
<188> APR 22 12:11:40 128.20.30.2-1 UNITMGR[138675056]: unitmgr.c(2240) 298 %% P
ower On Start complete on unit 1
console>enable
console#show ver
Image Descriptions
image1 :
image2 :
Images currently available on Flash
--------------------------------------------------------------------
unit image1 image2 current-active next-active
--------------------------------------------------------------------
1 3.2.0.10 3.3.6.4 image1 image1