I have 2 powerconnect 6224 stack using stacking module. the slave switch suddenly restart and lose connection. when i try to restart manually the slave switch it became available again. the problem here is, it happens frequently in nonconsecutive days and hours. I've attached some error I found and configuration of the switch, hope this will help.
Please help. thanks a lot.
========================================
console#show interfaces detail ethernet 1/xg1
Port Type Duplex Speed Neg Admin Link
State State
----- ------------------------------ ------ ------- ---- ----- -----
1/xg1 10G - Level N/A Unknown Auto Up Detach
Port Description
---- --------------------------------------------------------------------------
1/xg1
Flow Control:Enabled
Port: 1/xg1
VLAN Membership mode:Access Mode
Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Default Priority: 0
GVRP status:Disabled
Protected:Disabled
Port 1/xg1 is member in:
VLAN Name Egress rule Type
---- --------------------------------- ----------- --------
Static configuration:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Port 1/xg1 is statically configured to:
VLAN Name Egress rule
---- --------------------------------- -----------
Forbidden VLANS:
VLAN Name
---- ---------------------------------
Port 1/xg1 Enabled
State: Disabled Role: Disabled
Port id: 128.25 Port Cost: 0
Port Fast: Yes (Configured: yes) Root Protection: No
Designated bridge Priority: 32768 Address: 80:00:D0:67:E5:9F:22:57
Designated port id: 0.0 Designated path cost: 0
CST Regional Root: 80:00:D0:67:E5:9F:22:57 CST Port Cost: 0
BPDU: sent 0, received 0
console#show interfaces detail ethernet 1/xg2
Port Type Duplex Speed Neg Admin Link
State State
----- ------------------------------ ------ ------- ---- ----- -----
1/xg2 10G - Level N/A Unknown Auto Up Detach
Port Description
---- --------------------------------------------------------------------------
1/xg2
Flow Control:Enabled
Port: 1/xg2
VLAN Membership mode:Access Mode
Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Default Priority: 0
GVRP status:Disabled
Protected:Disabled
Port 1/xg2 is member in:
VLAN Name Egress rule Type
---- --------------------------------- ----------- --------
Static configuration:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Port 1/xg2 is statically configured to:
VLAN Name Egress rule
---- --------------------------------- -----------
Forbidden VLANS:
VLAN Name
---- ---------------------------------
Port 1/xg2 Enabled
State: Disabled Role: Disabled
Port id: 128.26 Port Cost: 0
Port Fast: Yes (Configured: yes) Root Protection: No
Designated bridge Priority: 32768 Address: 80:00:D0:67:E5:9F:22:57
Designated port id: 0.0 Designated path cost: 0
CST Regional Root: 80:00:D0:67:E5:9F:22:57 CST Port Cost: 0
BPDU: sent 0, received 0
console#show interfaces detail ethernet 2/xg1
Port Type Duplex Speed Neg Admin Link
State State
----- ------------------------------ ------ ------- ---- ----- -----
2/xg1 10G - Level N/A Unknown Auto Up Detach
Port Description
---- --------------------------------------------------------------------------
2/xg1
Flow Control:Enabled
Port: 2/xg1
VLAN Membership mode:Access Mode
Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Default Priority: 0
GVRP status:Disabled
Protected:Disabled
Port 2/xg1 is member in:
VLAN Name Egress rule Type
---- --------------------------------- ----------- --------
Static configuration:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Port 2/xg1 is statically configured to:
VLAN Name Egress rule
---- --------------------------------- -----------
Forbidden VLANS:
VLAN Name
---- ---------------------------------
Port 2/xg1 Enabled
State: Disabled Role: Disabled
Port id: 128.77 Port Cost: 0
Port Fast: No (Configured: no ) Root Protection: No
Designated bridge Priority: 32768 Address: 80:00:D0:67:E5:9F:22:57
Designated port id: 128.77 Designated path cost: 0
CST Regional Root: 80:00:D0:67:E5:9F:22:57 CST Port Cost: 0
BPDU: sent 0, received 0
console#show interfaces detail ethernet 2/xg2
Port Type Duplex Speed Neg Admin Link
State State
----- ------------------------------ ------ ------- ---- ----- -----
2/xg2 10G - Level N/A Unknown Auto Up Detach
Port Description
---- --------------------------------------------------------------------------
2/xg2
Flow Control:Enabled
Port: 2/xg2
VLAN Membership mode:Access Mode
Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Default Priority: 0
GVRP status:Disabled
Protected:Disabled
Port 2/xg2 is member in:
VLAN Name Egress rule Type
---- --------------------------------- ----------- --------
Static configuration:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
Port 2/xg2 is statically configured to:
VLAN Name Egress rule
---- --------------------------------- -----------
Forbidden VLANS:
VLAN Name
---- ---------------------------------
Port 2/xg2 Enabled
State: Disabled Role: Disabled
Port id: 128.78 Port Cost: 0
Port Fast: No (Configured: no ) Root Protection: No
Designated bridge Priority: 32768 Address: 80:00:D0:67:E5:9F:22:57
Designated port id: 128.78 Designated path cost: 0
CST Regional Root: 80:00:D0:67:E5:9F:22:57 CST Port Cost: 0
BPDU: sent 0, received 0
