Hello !
I try to enable a teaming connection between an Power Connect 7048 switch (stacked) to an Power Edge 720XD server. The server has an Intel Quad Port network card installed (Intel(R) Gigabit 4P I350-t-rNDC).
I do following settings on switch:
- define a LAG under ports/lag configuration
- activate the right ports under Link agragation/LAG Members (try out static and dynamic config)
- try out each LAG hashmode
- try out with and without spanning try settings
The follwing settings are set on the server:
- Installed the latest NIC driver and activate NIC teaming on netork port 2 and 3
- select IEEE 802.3ad Dynamic Link aggregation for dynamic mode
- try out static link aggragation with static mode
After configuration on dell switch i see that the current LAG status is UP. The check of the Intel card dos`nt shows any error or recomandation.
The network interfaces on the server showing Acitve in teaming configuration
And now the problem:
When i set the right IP Adress to the Team network interface i dont get any connection to the LAN. I ping to a componet and nothing happens.
What could i do?
BR
Patrick