When I try to configure a stactic route in the switch I get the following. I'm wondering if the image is corrupt except I have two of this model with the same trouble.
aspswt1(config)# ip route x.x.x.x /24 x.x.x.x
% Unrecognized command
a listing of the commands shows:
aspswt1(config)# ip
access-list This command creates an ACL, which perform
classification on layer 3 fields and enters to
ip-access configuration mode.
default-gateway Specify default gateway
dhcp Acquire IP address from DHCP server
domain-lookup To enable the IP Domain Naming System
domain-name To define a default domain names that the software
uses to complete unqualified host names
host To define static host name-to-address mapping in the
host cache
http Specify the HTTP server configuration
https Specify the HTTPS server configuration
igmp Global IGMP configuration commands
name-server To set the available name servers, use the ip
name-server global configuration command.
ssh Global Secure Shell protocol configuration subcommands
telnet Telnet server configuration
Software is:
SW version 2.0.0.46 ( date 14-Apr-2011 time 13:10:53 )
Boot version 2.0.0.0 ( date 12-Nov-2008 time 12:56:52 )
HW version 00.00.02