Hy to all.
In this morning i get this message by console. Since then about a year all was ok.
What this can be and how to repair.
In case his firmware one how to restore.
Below is the message. Hope help will come soon.
Need to get in line :)
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System Cache..........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
Testing CPU PCI Bus Device Configuration..........PASS
BOOT Software Version 1.0.0.13 Built 11-May-2003 14:58:20
Processor: MPC8245 Rev 0.14, 250 MHz (Bus: 100MHz), 32 MByte SDRAM.
I-Cache 16 KB, linesize 32.D-Cache 16 KB, linesize 32.
Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
Decompressing SW from image-1
8ae000
OK
Running from RAM...
.
Update Host params for stand-alone
******************************************************************
*** Running SW Ver. 1.1.0.42 Date 11-Jan-2004 Time 12:50:35 ***
******************************************************************
HW version is 00.00.02
Base Mac address is: 00:11:43:85:b3:84
Dram size is : 32M bytes
Dram first block size is : 20M bytes
Dram first PTR is : 0xB20000
Flash size is: 8M
STAND ALONE
01-Jan-2000 01:01:06 %2SW-F-FATAL: DILC_fatal_error: ERROR return: -3 bcm_cm_device_supported failed
- Feature unimplemented or unavailable.
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.1.0.42 (date 11-Jan-2004 time 12:50:35)
0x454ec
0x4551c
0x48140
0x2b6a74
0x1c52d0
0x1c5784
0x1c9308
0x315c0c
0x33394c
0x32da84
0x326efc
0x34d9f8
0x34db30
0x352e28
0x316da4
0x2bb360
0x5e080
0x3cb94
Booting...