N Series RADIUS key requirements
Does anyone know the N-Series (specifically the N2048) requirements/restrictions for the RADIUS shared key?I couldn't get it to work with the same shared key I used in previous generation switches...
View Articletwo N4032 switch trunk and vrrp
Hello,I am trying to setup the trunk port between two N4032 switch. the purpose is to implement the vrrp with these two switches. may I know the trunk port configuration and best practice for vrrp.Thanks.
View ArticlePowerConnect
Hey,Access Mode VLAN: 10General Mode PVID: 1 (default)General Mode Ingress Filtering: EnabledGeneral Mode Acceptable Frame Type: Admit AllGeneral Mode Dynamically Added VLANs:General Mode Untagged...
View ArticleHigh availability
Dears,please how to make high availability on San Switches located between the storage and serversif i have two switches N4000 Series what is the possible ways for high availability ??
View ArticleSwitch P2048 and block port?
Hi all,I've 3 swtichs on stack. And I have one device, when I connected on any port, device do not communication. Led not flashes.Device is OK, when I connect on my NB, communication is OK.Thank you...
View ArticleSwitch N2048
Hi all,I have three switches in stack. And I have one device, when I connect to any port do not communication.Led not flashing.Device is OK, I tested on my NB.Thank for all reply, and I'm sorry, my...
View ArticleDell vlan
Hi, Thanks for posting up the config. Here are some notes I took down while looking through.Thanks
View ArticlePowerConnect 6248P
Hello, New to the world of networking and was looking for some assistance regarding 2 Dell Powerconnect 6248P switch that I recently purchased. They are currently stacked with a 10GE CX4 stacking...
View ArticleStacking of 2x X4012 Switches
Hello,is it possible to stack two X4012 Switches. Could not find a clear answer.Thank youRegardsSimon
View ArticleEoMPLS Dell Switch
Hi all, I have to configure EoMPLS, but not sure how and if its possible with "Dell Power Connect 6248". The infrastructure or topology is like: Public switch ==== ISP Router ====== ISP Router =====...
View ArticleIP Netdirbcast
Hi All,Can someone please explain to me how this command works? My scenario is that i have an SCCM primary site server in a different site and i need Wake on Lan working.I can use SCCM to wake my...
View ArticleWarranty Dispatch/Service Schedule for July 1 - 4 (Canada/US Holidays)
Friday, July 1 is a Canadian holiday and Monday, July 4 is a US holiday. Please be aware of the schedule changes affecting Consumer, Commercial Client, and Enterprise warranty dispatches and...
View ArticleIssue with a Dell N4032F switch
Hi all,I'm a bit of a newb when it comes to Dell networking having had a background in Cisco IOS so this might be a dumb question but..... My equallogics can no longer replicate to our DR site and I...
View ArticleISCSI Disabled
Hi all,I'm quite new to Dell switches so please forgive me if this is a silly question. On my 6224, when I do sh iscsi, the switch returns Disabled. Does this mean the switch will not be in a state...
View ArticleHow to enable ports on a PowerEdge M630 switch (R1-2210)???
Good morning.We have purchased a VRTX PowerEdge M630 with an R1-2210 switch. We want to use one of the SFP ports so we can have a 10GB link. We cannot figure out how to map an external port to an...
View ArticleInbound Packets Being Discarded On Dell 6248 Switch
Hello guys,I am having an issue on my network. Once in a while icmp echo packets are being lost and this is causing our monitoring system to trigger false alarms.I have checked the switches interfaces...
View ArticleQuestion regarding Dell PowerEdge 2161DS-2 Console Switch
I just bought an old 2161DS-2 KVM over IP switch. I was able to install management software and configure the switch. When I try to access the switch from a web browser (Firefox) all the connections...
View ArticleDell N2048, dot1x, and disconnecting RDP sessions
Hello, group-We are using N2048s, and doing dot1x to a MS 2012 NPS RADIUS server. This is working fine. We are also in the process of migrating desktop OS from Windows 7, to Windows 10.What we are...
View ArticleM1000e Brocade 4424 ip address 0.0.0.0
HiI have a Dell m1000e blade with 2 brocade switch 4424 one of is working fine and other one I can not access since the ip adress on the swtich shows 0.0.0.0.It wont let me even change ip address from...
View ArticleVlans, Flooding and 5324
Hi,We used to use 4 x dell 5324 switches.Then we discovered VLANsWe changed to 1x5324 switch which has 4 vlans.However when the switch is flooded with traffic on the internet facing vlan (e.g. by a big...
View Article