Powerconnect 6248 and sonicwall router TZ300
I have a simple network for a retail shop. I am using a Sonicwall TZ300 router/firewall with a powerconnect 6248 switch. As well as a TP Link 8 port POE switch for my wifi nodes. The network suddenly...
View ArticleFailed to acquire an IP address on Vl1; DHCP Server did not respond.
N2024P keep loging this warning. How can I get rid off it. I do not use Vlan1 and switch management IP is on different Vlan which is VLAN100.
View ArticleIP configuration assistance on PowerConnect 6248
Hello everyone,I inherited a pair of stacked PC 6248 switches. These two switches are active and in production. I am not near these switches as there are located in another state at one of our other...
View ArticleNo lights on the ports m6220
HiI have a Dell m1000e chasis and a1/a2 has poweconnect m6220s. The internal ports 1-16 works and active. But when I plugged the cable on port 17-20 there is not light and show interfaces status says...
View ArticleQuestion about Switch N2048P ssh conection?
I need help with how to connect the switch through the ssh console to another switch. From a switch Dell N2048P to another from the console via ssh what is the way to do it only shows me the option of...
View ArticleChanging from /24 to /16 on a PowerConnect 5548p
Currently, the default VLAN on my switch is 10.1.1.0 /24. (it is currently the only VLAN)I want to change it to 10.1.0.0 /16. Is there a way to do this without resetting the config to defaults and...
View ArticleTrouble configuring a powerconnect 5548. No console
Hello,So I've inherit a powerconnect 5548P that I'm trying to setup but I can't get it to work.When I first plugged it I remember it was assigned an IP and I was able to reach the web interface. Now...
View ArticleNew MXL pair, one stack port flapping
We recently got a brand new M1000e with dual MXL switches in it, after cancelling the bare metal provisioning all I did was attempt to stack the two on the built in 40gb ports by using the "stack-unit...
View Article8024F can not create LACP connection
show interfaces status | include 0/18Te1/0/18 ybobdrrtr01 sfp1 Full 10000 Off Down InactiveTe2/0/18 ybobdrrtr01 sfp2 Full 10000 Off Up Activeshow interfaces port-channel 1Channel Ports Ch-Type Hash...
View ArticleX-Series DHCP Server lease limits
I can't find anywhere in the documentation the maximum number of addresses that the built-in DHCP server can lease. I know on some Dell switches it's very small (like only 256 address on the N-series)....
View ArticlePotential memory issue ?
Good morning,I am seeing the following issue in the logs of a stacked pair of N4064p switches running firmware 6.1.1.7broad_hpc_drv.c(4362) 465509 %% _soc_xgs3_mem_dma: FP_TCAM.ipipe0 failed(NAK)I...
View ArticleX1018 - Can not ping or route with VLAN 2
Hi everyone,i have some issues with the configuration of the X1018 for routing between two new VLAN's. So far i have set up 2 VLAN's in different subnets 172.x.x.x and 192.x.x.x. I activated the ip...
View ArticleDell PowerConnect 8132
Hi! While trying to reset to factory defaults I did "erase flash all" and hosed the switch! Any way to recover? The indicator light on the front is red and the console does not work!
View ArticleRouting Between VLAN's not fully working - N3024
I'm new to configuring Dell switches and I'm having an issue with routed VLANs.There are several VLANs on this switch, but I'll isolate the problem to 2 of them for simplicty.VLAN 300 -...
View ArticleN2000 & N3000 serie SSH stops working after some time
Hi team,After upgraded to the latest firmware 6.3.1.8. The SSH still stop working after some time (2 weeks or 4 weeks). So please help to update new hot fix to solve this issue.Soknaren
View ArticlePowerConnect 2848 - Multiple VLAN on 1 port not working
Hello everyone.I have a Dell PowerConnect 2848. My Router is a Netgear SRX5308. In the router, I have created multiple VLANs (VLAN ID 10 and 20) and want to pass that over to the ESXi server. If I...
View ArticleMicrosoft NLB on N4000 switches
Hi, I think I know the answer to this, but is there a work around to use NLB in multicast mode on N4000 switches?We have multicast setup at one site using S6000 switches and had hoped to replicate at a...
View ArticleDell PowerConnect 5424 - %ARP-E-ARPTBL: ARP Table Overflow
The switch is getting this message " %ARP-E-ARPTBL: ARP Table Overflow" recorded in the logs every 30 seconds or so for the last day or so. Clearing the arp-cache gets rid of the message for a few...
View ArticleHow to configure a VLAN to accomodate 1000 IPv4 addresses?
I need to configure a VLAN to accomodate 1000 IPv4 addresses on PowerConnect 6224. I created VLAN 20 and went to Routing --> IP --> Interface Configuration and selected the VLAN20.Following...
View ArticleDell Switch How to Kill A Process
Hello, I was wondering how to “kill” process running on a Dell Force 10 s 4810 Switch. As shown below is my problem;Found that sshd on dell switch is using high cpu util.FTOS#show processes cpu...
View Article