Stacked N3024 OOB IP Conflict
Okay, I'm not getting this2 x 3024 stacked, OOB IP address configured as 192.168.0.11 (MGMT LAN)I was scanning my network to do a cleanup of ip's in dns & dhcp when I noticed a strange ip,...
View ArticleM8024-K blade switch - won't factory reset
I have two Dell M8024-k switches and they are driving me absolutely crazy. I recently placed them both in a stack for testing purposes (they're not in production). Now I want to just reset them to...
View ArticleDell OS on VMWARE
Hello,After created on Virtualbox the VM based on FTOS, I have tried to export to Vmware platform and doesn't works. Also I have modified the ovf file that is the description file but doesn't...
View ArticleInterVLan Routing
I currently have 7 layer 3 switches. I have 2-n4032 switches for my backbone. I have 2-Dell n3024p switches in one closet. A HP Procurve in the server room and 2-Dell n3024 switches in the server room....
View ArticleOpenManage Switch Administrator with HTTPS SHA 256 CSR on N4032F, possible?
Hi,we have a Dell Networking N4032F Switch with Dell OpenManage Switch Administrator Version 6.0.0.8.Since SHA-1 is not supported by browsers in 2017, I would like to change the certificate to SHA-256...
View Article[SOLVED] Power Up A Stack
I've just received 5 pc6248s and I want to build them into a stack.1. The switches are all used so do I have to factory reset them before building them into a stack?2. From what I read in the Dell...
View ArticlePreferred QoS configuration on Dell 2048P edge switches
Hi All,I wanted to establish what is the preferred QoS configuration for a 2048P switch that connects to Cisco IP PhonesThe Cisco phones mark their own voice signaling and voice bearer packets with...
View ArticleDell switch N3048 ACL problem
Hello,We are trying to setup two N3048 stacked switches and we have trouble with ACLs. We need to define ACLs on every VLAN and thought that rules are applied just in case that packet is leaving vlan...
View ArticleTrouble with N3024 switch and Forcepower 10 switch
I have a system I am trying to configure. I have a dell N3024 external switch and a Forcepower 10 switch connecting to a server. There are 2 separate systems. System 1 works just fine but the same...
View ArticlePowerConnect M8024-k switches losing clock settings upon reboot
I have 2 PowerConnect M8024-k blade switches in a stack configuration (although this issue was also occurring without the stack). I am setting the clock manually with the clock set commands, but every...
View ArticleDELL N3024F - ARP[ipMapForwarding]
Hi ,I am having issues with ARP broadcast from our network devices which has Failover virtual IP configured for 2 x physical NIC connection.Our setup is 2 x DELL N3024F switch connect to 02 x DELL...
View ArticleAccessing boot menu on a M8024 from the CMC cli
Is there a way to access the boot menu on a M8024 though the CMC console redirect? Bought a used switch and I am unable to log in and need to reset the password and all the settings. If not will any...
View ArticleNeed help with commands to clear a switch port config N2024 Stacked
The existing config is:interface Gi1/0/20speed 1000description "WifiLocation2"switchport general allowed vlan add 154switchport general allowed vlan add 153 taggedswitchport general allowed vlan remove...
View Article802.1X with MAB on Phone+PC port
Hi,I am considering enabling 802.1X on N2000 switch on a port with Phone & PC connected and need some clarification on the subject of behavior of this setup.I want to treat the Phone as 802.1X...
View ArticleDell N4000 decrease convergence time MLAG/VRRP
I am having issues with the time convergence in this solution. Basically, I have two N4064F in MLAG and running VRRP. Everything works fine, but the time is killing me.Sometimes it takes 5-12 seconds...
View Articleload balance Radius Authentication
HI Guys,we have a bunch of N1548p in our office and our new project is to set RAdius authentication in those switch, my question is how can i configure the switch in case my frist radius server fail it...
View ArticleHelp setting up Voice VLAN on PowerConnect 3548p
Hi,I currently have four 3548p switches and a Mitel 3300 telephone system. At present we have a simple flat network but as things are expanding I would like to separate the telephone traffic using a...
View ArticleJumbo Packet error on N3048P Switch Stack
I do not have Jumbo Frames enabled on any device on my network but I am continuously getting Jumbo Frames (which show up as errors on one of my switch stacks) and I have no idea where they are coming...
View ArticleVOIP phones unable to obtain IP. N4032F core with 3 x stacked N2048P edge...
My DHCP server is configured with all the scopes and option 156 (configServers=1.1.100.10, ftpservers=1.1.100.10, country=7, language=4, layer2tagging=1, vlanid=100) which is required for our Shoretel...
View Article