Clik here to view.
Problem with second power supply on PowerConnect 8132
Hello!I have a great switch Dell PowerConnect 8132 with 2 power supply. But second (or left) not activated.I'm rotate power supply one on over, no result. Both power supply is working (green light on...
View ArticleDell PowerConnect 6024 and VRRP
HI all,Ok so we have 2 separate WAN circuits coming into our Business.I would like to try and setup redundancy for these 2 circuits.Currently both routers are managed by the Telco companies.We...
View ArticleHow to make a switch PC8164 root in Spanning Tree wi
Hi there!I want one of the switches PC8164 to always be the root for different VLANs that are configured.How to made it?on cisco switches this could be done by command:Spanning Tree VLAN 1 root...
View ArticleCan't ping anything on VLAN on 6248
Hi there,I already spent a day and half trying to solve this problem but I am not getting anywhere. Here is the basic breakdown of the test setup.Port 1: Connected to the existing network (so I can get...
View ArticleWhat fiber to use between two server rooms for 7048's
I'm looking at installing a new core network for two small server rooms and using Powerconnect 7048's in a stack in each room. I'm not sure how best to connect them though. The two server rooms are...
View ArticlePC8024F Firmware
Customer has 2 x 2 PC8024F Stacks which are linked. When upgrading the firmware to 5.1.1.7 it appears that all 4 switches upgrade correctly. When they start the config the switches "lock up" and there...
View ArticlePacket loss/drop on PC6224 & weird MAC addresses
Hello,i'm having a huge problem that i'm finding near impossible to crack:on a large spine-leaf netwok i have 3 core PC6224 switches connected via their 10Gbit ports(there's no STP/mesh/nothing, a...
View ArticleProper VOIP/VLAN configuration for 6248 (coming from 5448)
We have a variety of 5448 switches in our network right now, all ports are configured as such (simplified of course, but this is the gist of it):1interface range ethernet g(1-48)2switchport trunk...
View Articlewhat size of RAM, memory buffer and flash, has PC 6224P
Hi there!I need to know what Flash, RAM Buffer and Memory size, have Switch Dell PowerConnect 6224P.let me know.Regards!
View ArticleChannel-group Its not work (via LACP) between 6624 and 6224F
Hi everyone, i need help.link aggregation its not works. The example shown below use the switches 6224 and 6224f6224interface ethernet 1/g23channel-group 1 mode autodescription...
View ArticleTransit VLAN on PowerConnect 6224
I need some help sorting out a routing issue on a 6224 we have configured to act as a transit vlan for one of our locations. The general idea is 8.143 is the transit vlan, 8.144 is our PC LAN, 8.145...
View ArticleConfiguration of 3424 over LAN
Hi, I am wanting to configure the 3424 over a LAN connection by using this serial Ethernet converter. Does anybody have any experience or recommendations with using such a setup? I assume that I would...
View ArticleForce10 C300 Cisco 6509 LACP Port-Channel
Hi, I havea problem with theconfiguration of anLACPport channel Force10: (System image file is "flash://FTOS-CB-8.4.2.6.bin)interface Port-channel 2 no ip address switchport no shutdowninterface...
View Article5548P- inconsistent PoE experiences
I have a recently deployed stack of 3 5548P switches. I'm having some issues when trying to supply power to Ruckus 7372 wireless APs: in some ports, the APs will power on, and transit data exactly as...
View ArticleWilress AP, IP-based camera, even Laptop can be powered by PoE switch
POE52024M Web smart managed PoE switch which is based on new generation of high performance BROADCOM IC is carrier-class layer 2 management switch with 2 gigabit uplink interface. It can increase the...
View ArticleMaximum frame size support for LInk aggregation Dell Power connect 6224
does anyone know where i can find the info for my Dell PowerConnect 6224 and if it supports jumbo frames.I am trying to get the most out of my switch and it seems when I set my device to jumbo frames...
View Articleconnecting 4 6248 switch using stacking unit
Hi,I have 4 6248 units. connected according to page 5 here :http://www.dell.com/downloads/global/products/pwcnt/en/pwcnt_stacking_switches.pdfthe manual states that the units has to be brought up in a...
View ArticlePowerconnect 6224/6248 802.1X issues
Hi,I'm running a stack of 6224/6248 switches in a windows 2008R2 environment. They are configured to control access through 802.1 (auto-mode) and to get the authentication information, including vlan...
View Article6224 config upload & download
How do I copy the config of one 6224 and upload this config to another 6224. NOT using command line.
View ArticleRemoving a switch in stack, and putting it to another stack, will it work
Hi there!i've two different stacks, in two different locationLocation01STack01 -> with dell switched PC8164-01 and PC8164-02Location02STack02 -> with dell switched PC8164-03 and PC8164-04On all...
View Article