5548P configuration question
Hello, We have 4 Dell PowerConnect 5548P switches which are stacked. These two switches are going to be connected to desktops/notebooks and printers on one VLAN, and then some IP phones on a Voice...
View Article3424 - Faulty PoE
I have a 3424P with a Faulty PoE Power Status.How do I fix it?ThanksTim
View ArticleFirmware Update On PowerConnect 2808?
I have a PowerConnect 2808 switch that is in Managed Mode. I can connect to it through the we interface as well as through telnet but I'm just not clear how to flash the switch with the new firmware....
View ArticleConfiguration of 3424 over LAN
Hi, I am wanting to configure the 3424 over a LAN connection by using this serial Ethernet converter. Does anybody have any experience or recommendations with using such a setup? I assume that I would...
View ArticlePort Mirroring on Dell PC 6224
Hi,I am trying to set up Port Mirroring on a PC 6224.From the Configuration Guide, I read "You can configure many switch ports as source ports and one switch port as a destination port." .But when I am...
View ArticleLooking for advice on QoS configuration for S25N Switches
Good Day AllI Just rebuilt my network using Dell S25N switches, I have some old Dell Powerconnect 5448's that are my VOIP switches meaning I have PoE Phones plugged into them and I have a Fonality Box...
View ArticleDell PowerConnect 2824 Sensor 1 overheating
I received several Dell PowerConnect 2824's to put in to implementation, but in checking the status of the hardware found an overheating issue in the Diagnostic log. I have to run all tests in...
View ArticlePC 6224 VLAN on existing LAN
I'm trying desperately to add 2 VLANs to our existing LAN. We have a Sonicwall at 192.168.111.1 and our existing LAN machines can connect to the internet with the following:192.168.111.n 255.255.255.0...
View ArticleDell PowerConnect 6224 high CPU usage
Hi all,First of all I want to say that I read a lot of threads on this forum in order to debug my problem. I ruled out STP since I have it disabled on all ports.My configuration is as follows:2 dell...
View ArticlePC 5548 and LAG - Only 1000M Speed
Good Day, I have set up a PC5548 with a LAG to another switch and a LAG to a WS2012 Server. I have configured both Lags correctly and they appear as "up". One thing I am having trouble with is speed,...
View ArticleLinksys SRW2024P starts blocking ports after i plug in PC6224
I have setup a stack of Dell PC6224 and connected to a DELL PC2824. The PC2824 is also linked to a Linksys SRW2024P.Everytime I plugin the PC6224 switch the Linksys starts blocking ports.How do I fix...
View Articlepc2824 copy run start
why is there no "copy run start" command for the 2824?how do i save my running config using CLI? I cant find it anywherethanks.
View ArticleQoS on PowerConnect 3548P's And Force10 S25N
Good Day all This is a bit (actually a lot) of an engineering question. I have two 3548P's with a VLAN for VOIP and A VLAN for Management and nothing but Polycom phones plugged into it, , They are...
View ArticleProtected Ports propagate some MACs on PowerConnect 6248 - bug?
We have turned on Protected Ports feature on two switches (PowerConnect 6248). All is working as expected (our goal was to separate ports, see more on...
View ArticleNeed help configuring 6224 Power connect switch
Hello everyone,I hope I can get some help. I am new to Dell 6224 and trying to get vlan routing working. Starting with a basic configuration.Vlan 30 = 200.168.30.xvlan 35= 200.168.35.xlaptop#1 vlan 35:...
View ArticleHow to limit management traffic (ssh and https) toward switches PC8164
Hi there!i want to limit traffic to manage the PowerConnect devices PC8164 for ssh and https.let say, that only this subnet: 192.168.7.0/24 and host 192.168.8.8 to have access for ssh and https for...
View ArticleFirmware update on 8024F switches
We have 5 x 8024f switches set up as 2 clusters of 2 and 1 stand alone.They are running fine with firmware v4.2.1.3, but there is some extra functionality was can use with V5 for connecting Equal-logic...
View Articlehow to use Ssh and Https to PC8164 PC5524
hi there!How to use SSH and Https to connect to PC8164 and PC5524?Regards!
View ArticleHow to change the Unit Number and Master/Standby on PC8164
Hi there!I've a stack with only two switches that have this configurations:Physically switch above: Is standby, and have Unit nr 2Physically switch below: Is master, and have Unit nr 1Now, i want to...
View ArticleDeactivate 802.1x Authentication temporarily
Good Morning Everyone,I am a newly hired sys admin for a small company. Currently we have 802.1x authentication on all switch ports but it does not work because our Cisco ACS unit has failed and it was...
View Article