Clik here to view.
Connection between 2 vlans in 2 PowerConnect 6224
Hello,In the place where I work we've bought a couple of PowerConnect 6224 switches and we've set them up with a very basic configuration:3vlans per switch (with id's 1,2,3)The first vlan is not been...
View ArticleFirmware upgrade issue ...and closing inbound UDP Ports
I have a PowerConnect 6248 running 2.1.1.4. I have tried to upgrade the firmware (3.3.7.3) according to the PDF instructions (PC6200 Upgrade Software from version 2.x Procedure.pdf). Everything works...
View ArticleRSTP and LAGs
We're noticing we are getting a high number of discards on our LAGs and member ports of the LAGs that are in the Alt or Backup state. Of course this is to be expected as they are discarding packets....
View ArticleTrying to setup Dell 6248P in Cisco Voice enviroment with 7960 phones with...
I am trying to setup a Dell 6248 in my Cisco voice envirmonment. I can get vlan1 to ping acrros the truck but not vlan 10Vlan1 DataVlan10 Voice Vlan1...
View Article6248P POE firmware missing
I have a Powerconnect 6248P with POE not working. I used the show poe-firmware-version and it returned "Failed to get firmware image version details. I have another 6248P that will show the firmware...
View ArticlePC8132F to Cisco Catalyst 3600
Good Day,I am hoping that someone can help me here, I am having issues getting a port-channel with 802.1q working between a 2 device stack of 8132F switches and a single Cisco Catalyst 3600 series...
View Articlemoving data off of default vlan id
one switch is data vlan 1 and voice vlan 60second switch is data vlan 10 and voice vlan 20is the below configs the same effect?ABC-3548P-STACK# show interfaces switchport ethernet 3/e37Port : 3/e37Port...
View ArticleUnacceptable frame type?
What does this counter really mean? We seem to only see this counter increase on ports that are members of LAGs and where the LAG is in the RSTP Alternate state (discarding).
View Articledata and voice on same port
powerconnect 3548pcisco ucs 500 ( i belive)i have left data on the default vlan 1created a vlan 60 for voicethe port where the phone server is (gives out dhcp for phones) is set with pvid 60 (so i...
View Articleopenmanage network manager does not login to switch
i am using openmanage network manager 5.1 to manage PowerConnect 7048 switches.i am able to manage/monitor the switches using SNMP without issues.however when i use telnet/ssh it keeps throwing errors...
View ArticlePowerConnect 6224 - Unable to connect two switches using two vlans and two...
Hi Experts,I've set up the following configuration using PowerConnect 6224 switches:PC A --- SW A --- SW B --- SVR A (via VLAN 2)PC B --- SW A --- SW B --- SVR B (via VLAN 3)I've set:1. two vlan 2...
View Article6248 Configuration
Hi,We have a stacked 6248 (two switches). I am trying to get to grips with the best way to set up VLANs. The switch has been basically in operation for quite a while but it's features were never used....
View ArticleIssue with Intel SFP+ and Dell 8132F (and 5548P)
I recently purchased switches to run data and phones for our office, however I'm having some issues with the SFP+ adapters not linking.The transceivers in question are Intel branded "FTLX8571D3BCV-IT"...
View ArticleHow to configure login authentication?
After I configured login authentication with local username and password, I always got Login As prompt, then Username and password prompt. How to eliminate Login As?When I ssh to switch, I got...
View ArticlePowerconnect 5548 sending untagged frames to Sonicwall
Hello,On my Sonic Wall's packet monitor, I keep seeing untagged frames coming in on my parent X0 interface.Does anyone have any ideas about this?I currently have 4 sub interfaces configured on X0, and...
View ArticleTrying to setup a 6248 and VLANs
I'm just getting into VLANs and am trying to setup some testing ones, currently all on one switch. I have 3 besides the default set up. Each have an IP and Subnet applied. I've added a device to the...
View Articlevrtx ethechannel with cisco
how do I configure the Dell vrtx external links and create a port channel with a cisco switch?
View ArticlePowerconnect M8024 connect to Netgear XS712T
I am trying to connect the M8024 switches to a Netgear XS712T 10GB copper switch, and things are not going well. I can connect my M8024 with the 10GB Copper uplink to my HP infrastructure (at 1gb), and...
View ArticleWhat is the max Number of mirrored ports supported on 6224 swithc
I have a Dell 6224F stack and I have a IDS tool that needs to sniff the traffic, running image 3.3.4.1, how many ports can be configured for mirroring with this version of code , read that at one time...
View ArticleVLAN Priority on a Trunk port
What is the simplest way to give one VLAN a higher priority than another on a trunk port? I have two VLANs, the default and VLAN 10. I want VLAN 10 to have an 802.1p priority of 6 and I want the...
View Article