GVRP & 6248 - 2848
Hello,I'm trying to configure GVRP between a Powerconnect 6248 and a 2848 switch.On 6248 , no problem i found many parameters , but on 2848 nothing .Where can i find on CLI or Web interface the GVRP or...
View ArticleOSPF Filters
Is there a way to apply a filter to ospf areas so that they do not communicate to other areas? This is for an 8164F switch.
View ArticleCopy Running-config startup-config via SNMP (7048/8024)
Hi,I'm looking for a way to copy our running-config to startup-config via SNMP on our newer powerconnect switches at regular intervals, it's a requirement for PCI compliance.I've found links on how to...
View ArticleDell PowerConnect 5548P VLAN bridge?
Hi,I got PowerConnect 5548P.VLAN 1 is gi1/0/1-42VLAN 2 is gi1/0/43-48VLAN1 is 192.168.16.0/24. ADSL2+ router is on 192.168.16.1. SBS 2011 (DHCP, AD, Exchange, etc) is on 192.168.16.2 and 30+...
View ArticleAdding a PowerConnect 5548 to a 7048 stack
Hello,We have a 7048 stack with 5 switches and we would like to add a single 5548 to which we will connect workstations. How should we connect the 5548 in term of wiring it to the stack?Thanks Dov
View ArticleSFP transceiver compatibility
I am getting ready to upgrade my PC3524 to a PC6248. Is the SFP transceiver in my 3524 compatible with the 6248? Or will I have to get the new transceiver also?Thanks
View ArticlePC5524 TACACS+ & Radius
Hi Everyone I have some questions about PC5524, could anyone please kindly give me some information ? 1.Does anyony know how many Raiuds servers can be support by a PC5524 switch? 2.Can I set 2 TACACS+...
View ArticleDell Powerconnect 5524 Management on VLAN not possible. Management ACL drop...
Hi,I am trying to access my Powerconnect on a separate VLAN other than the default VLAN.I have several VLANS Setup 1, 5,10, 20, 70I can currently access this switch on a address in VLAN70 from within...
View ArticleShould I enable multicasting on 3548P, that is solely acting as a switch for...
Is there any advantage to enabling IGMP snooping on a 3548P switch that is acting purely as an edge switch serving connectivity between Cisco VoIP PoE phones, and a Cisco VoIP PBX? There appears to...
View ArticleFW 6.0.0.8 on 8164 (now N4064F) MLAG via GUI
Hi,am i correct when i assume the newly introduced MLAG feature is only available on CLI and not via GUI? Best regards,Joerg
View ArticleChanel group with link aggregation
I have two dell powerconnect 6224 switch (its stacked). now there are two links coming via Radio and a fiber. my question is i want to use one of them as a backup link. one of them should not be...
View ArticleForce10 and Dell Openmanage Network Manager snmp problem
Hi,I set-up snmp on Force10: traps, community string, I also set-up configuration on omnm but for some reasons I could not authenticate with F10, please find config below and some main details:...
View ArticlePowerconnect 2848 with Sonicwall NSA 240
Hi Guys,I am not sure if this was discussed already in the forum but would appreciate if somebody can shed a light on this. I have powerconnect 2848 and planning to create 4 VLANS. Similary I also have...
View Articledoes track, ip sla is supported in Dell Networking PC8100, Firmware Version...
hi there!it seems that are some new features in this new version of...
View Articleconfiguring a 3548 stack to be used with IP phones
We have a 3548stack with 3 switches. The first port is connected to a 7048 stack and the rest of the ports are connected to IP phones. How should we configure this stack?Thanks
View ArticleVIP when 8132F Cluster
HiI have a pair of 8132F was cluster already. I would like using this as a internal routing gateway. Should I still require to setup VRRP VIP or just using the interface IP including assign different...
View ArticlePaid Support required- Dell 6248.
Hello Community,I am looking for a consultant that can help me on the setup bellow.We have 5 Dell 6248 switches and are being used as routers for customers.1. The 1st problem is that we need to...
View ArticleSwitch M6220 on Dell M1000e
I did a file transfer (a couple of gigs) on a m610 blade server to another server (outside the chassis) and it has impacted the network (switch M6220) on another m610 blade server that is on the same...
View ArticlePort security mode lock | secure permanent issue 35XX
Hi all. I'm trying to configure port security on our Dell 35XX switches here at the office. Up till now I've been using "max-addresses" mode to learn up to the maximum amount and disable if security...
View ArticlePowerConnect 2708 Reset
I have a PowerConnect 2708 that I would like to reset back to factory settings. It shows it is in managed mode, but I can't get to the web interface.I'm not sure what the current IP of the switch is. I...
View Article