GVRP Protocol Not working Btw Dell Power Connect 5548 and Dell Force10 S4810...
Hello,I am trying to enable GVRP protocol BTW Dell Power Connect 5548 and Force10-S4810 Switch but I do not see any communication going on from either side. I tried creating VLAN's and Tested from both...
View ArticleN series and X series SFP compatability
Does anyone have any information on SFP compatibility for the newer N and X series switches? I've looked everywhere and can't even find a part number for the official dell ones.Basically I'm wondering...
View ArticleInternet issue with VLAN
Hi Everyone,We're experiencing a very strange problem with our PowerConnect 6248. We have a VLAN (8) that we use as an internet VLAN. Our internet connection is connected to VLAN 8. It consists of a...
View ArticleSetting vlan MTUs on x1052
I am sorry if I am making a very newby-ish error here, but I can't find anywhere in the GUI or in the command line where one can set the MTUs on a vlan on the x1052. As a matter of fact I can't find a...
View Articlecore switches
I m studying dell networking core switches , in these switches i m unable to get to many fabric family are there also the no of routes like ospf, bgp , ospf , peers, interfaces present in these...
View ArticleCould I use the MLAG feature of N series switches with vSwitch？
HiI should deploy a new vSphere6 with 8*R910 servers and 2*N4032F switches. The 2 switches would be default gateway for VMs, and connect to a core Cisco switch. So I want to know if I could use vSphere...
View ArticleHow to block IPv6 on 35xx series switches.
I am having IPv6 multicast and broadcast issues on a IPv4 only network. The 33xx switches has ACLs that were usable, however the same commands are not available. Is it possible to block IPv6 on the...
View ArticleN3048 Web and SSH stuck
HiI have 2 N3048 in stack, yesterday after add email recipient web interface stuck. No webpage no responding, wen i try connect via ssh using putty, i enter login and password and putty stuck too (when...
View ArticlePort Mirror into MXL10/40 to VM
We have a new M1000E with a MXL10/40 running VMware and would like to port mirror our VoIP phone system to a VM running on that equipment to record calls. There is a port-channel with a couple of...
View Articlepowerconnect related acl ?
Hi, got a set of M8024 switches, pretty much same os as 8024 6224 etc...I am building a vlan acl, works fine leaving aside the issue that when I want to put an acl line in front I have to re-create the...
View ArticleProblem to communicated between servers and PowerConnect
Hello team,It’s my first time to work with blade Dell, we have just bought blade M1000e with two servers, SAN switch and Powerconnect M8024-k (LAN Switch).I have installed ESXi on servers and I...
View ArticleConnecting Powerconnect 5424 to N3048 using lacp for iSCSI and NFS traffic
I have a N3048 that Im trying to use to connect to a N3048 using lacp but the vlans are not being passed between both switches. I can ping the ip addresses of devices on each switch but can't ping...
View ArticleCreating DHCP Server on DELL X1018P
Hi All,Actually I have some question for creating DHCP Server per VLAN based on DELL X1018P.I want to creating DHCP for 2 VLAN : VLAN 10 --> port 1 - 10 (192.168.2.xxx/24)VLAN 20 --> port 11 -...
View ArticlePowerConnect 5324 SFP Module
Hi,I have a PowerConnect 5324 and a "QLE2462 PCI Express to 4Gb FC Dual Channel".What modules i would have to buy to get them talk to each other?The switch seats on the server so i'm pretty sure i need...
View ArticleClik here to view.
Configuring N3024 Switch as Redundant
Dear All,Hi, I just get Dell N3024 as a Core Switch and X1026 as Access.I try to create topology like this :VLAN 10 : 10.10.10.xxx/24VLAN 20 : 20.20.20.xxx/24VLAN 30 : 30.30.30.xxx/24VLAN 40 :...
View ArticleFrequently switch is going offline from the network.
Hi Team,We have one dell P5524 in our network and the same is made as core switch.recently we found that switch is going offline from the network and all the nodes connected to this switch are...
View Article6248p - config review - voice vlan + diffserv
Hello Everyone,I’m in the process of redoing our switch configuration to support our new Voip solution and I would like to hear from all of you to see if I this is an efficient way of setting all this...
View Articlex1052 - add vlan manager interface
Hi,I need to replace existing 3com 24 port with new x1052. Old 3com have a vlan 30 dedicated to the management and VLAN 1 classic. In the new switches should I do the same thing. Use Management VLAN...
View Article7024 10GbE Module with host attached - not uplink
Can you add a host to a 10GbE module on the 7024's? I get the link up, but no packets sent, hence no pings. This is what I am using:Ethernet Switch: Dell PowerConnect 7024...
View Article[6248] DHCP on VLAN
Hi, i have a problem witch config:I have Win Server 2012 r2 where i have NIC teaming which 2 adapters (10.111.1.100 - to connect internet, and 10.111.10.1 - to DHCP form VLAN)This is my...
View Article