hi,

I search how can i update the "Enclosure" tag in Fex description on my M1000e blades company.

when i make "sh fex detail" on Nexus5xxx , i have only this description.

It-is possible to change this tag ?

thx.

fred

The last two weeks we had about 3 times 30 seconds of downtime caused by out switches. The problem is that a lot of packets are being discared. These packets are received on our core switch. We have configured two 6224's in a stack connected to multiple 3500's. They are connected via two cables and configured as port channel on both sides. 

The regular port channel does not show any errors:

CoreSwitch#show interfaces counters port-channel 8

Ch InOctets InUcastPkts InMcastPkts InBcastPkts
---------------- ---------- ----------- ----------- -----------
ch8 2214803607 11553709 144015 8191

Ch OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
---------------- ---------- ------------ ------------ ------------
ch8 12432260369 13633306 1196509 655365

Alignment Errors: ............................. 0
FCS Errors: ................................... 0
Single Collision Frames: ...................... 0
Multiple Collision Frames: .................... 0
Late Collisions: .............................. 0
Excessive Collisions: ......................... 0
Oversize Packets: ............................. 288931
Internal MAC Rx Errors: ....................... 0
Received Pause Frames: ........................ 0
Transmitted Pause Frames: ..................... 0

AccessSwitch# show interfaces counters port-channel 1

Ch InUcastPkts InMcastPkts InBcastPkts InOctets
---------------- ------------ ------------ ------------ ------------
ch1 966097929 93105839 49047587 831619282606

Ch OutUcastPkts OutMcastPkts OutBcastPkts OutOctets
---------------- ------------ ------------ ------------ ------------
ch1 862523206 12199637 1535178 211770915270

FCS Errors: 0
Single Collision Frames: 0
Late Collisions: 0
Excessive Collisions: 0
Oversize Packets: 0
Internal MAC Rx Errors: 0
Received Pause Frames: 0
Transmitted Pause Frames: 0

However, looking at the interfaces more specific show something different:

CoreSwitch#show interfaces counters ethernet 1/g8

Port InOctets InUcastPkts InMcastPkts InBcastPkts
---------------- ---------- ----------- ----------- -----------
1/g8 586862096 2984293 96750 4030

Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
---------------- ---------- ------------ ------------ ------------
1/g8 6678995559 6414005 356659 246406

FCS Errors: ................................... 0
Single Collision Frames: ...................... 0
Late Collisions: .............................. 0
Excessive Collisions: ......................... 0
Multiple Collisions: .......................... 0
Oversize Packets: ............................. 106394
Internal MAC Rx Errors: ....................... 0
Received Pause Frames: ........................ 0
Transmitted Pause Frames: ..................... 0
Receive Packets Discarded: .................... 0
Transmit Packets Discarded: ................... 0

LANStack2#show interfaces counters ethernet 2/g8

Port InOctets InUcastPkts InMcastPkts InBcastPkts
---------------- ---------- ----------- ----------- -----------
2/g8 1652287248 8681279 47883 4190

Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
---------------- ---------- ------------ ------------ ------------
2/g8 5849332071 7335827 843155 410456

FCS Errors: ................................... 0
Single Collision Frames: ...................... 0
Late Collisions: .............................. 0
Excessive Collisions: ......................... 0
Multiple Collisions: .......................... 0
Oversize Packets: ............................. 183346
Internal MAC Rx Errors: ....................... 0
Received Pause Frames: ........................ 0
Transmitted Pause Frames: ..................... 0
Receive Packets Discarded: .................... 2167
Transmit Packets Discarded: ................... 0

Unit 2 discarded some frames! I see this behavior on all switches connected to the second unit. 

Port configuration:

CoreSwitch#show running-config interface ethernet 1/g8
channel-group 8 mode auto

CoreSwitch#show running-config interface ethernet 2/g8
channel-group 8 mode auto

CoreSwitch#show running-config interface port-channel 8
service-policy in VOIP
spanning-tree guard root
switchport mode general
switchport general allowed vlan add 8,10,12,20,120,200 tagged
switchport general allowed vlan add 1 tagged

AccessSwitch#

interface port-channel 1
switchport mode general
switchport general allowed vlan add 8,10,12,20,120,200 tagged
exit

interface ethernet g3
switchport mode general
channel-group 1 mode auto

interface ethernet g4
switchport mode general
channel-group 1 mode auto

A soon as we lost connection I rapidly connected to the switch and did a show process cpu command to see what what going on. The cpu utilisation is higher than normale but not unacceptable high. Normally it's below 10% and now the 1 min timer raised to 32%. 18% was caused by the ipMapForwardingTask, which might indicate a buffer issue? 

Any troubleshoot tips? Vlans are the same. The stranged thing is that only unit2 is discarding packets. Vlans are configured the same so that doens't explain the discards. We also notice a connection loss for a short time so that's not the issue. 

Good afternoon, I currently have 2 (stacked) 3048P a 4064p and a bunch of Cisco switches (also stacked) I cannot get voice working on the Dell 3048p switches.

Seems like a fairly low level error at the Dell 3048p end, I can ping each stack of switches in turn and the gateway router. All on the voice VLAN IP address range. However I cannot ping any hosts connected on the 3048p. If I set the port to any other VLAN except the voice VLAN it works fine.

But for Voice it doesn’t work, I have tried ACCESS, GENERAL and TRUNK modes and have assigned a static IP address to the host and tried 2 different models of phone. For all intents and purposes traffic just doesn’t get passed to the host.

Has anyone else had this issue before?

Hi, I was contacted by a company who had lost their entire skillset when an employee left, and powerconnects are not my strongpoint.

THey have 4 stacked 3548P's - console ports are  inactive, and web gui stopped responding. we need to do some config, and I don't understand how to "restart/reset" the network, to get the web gui back. I suspect that a reboot would kick it all back to life, but this is their entire LAN I am juggling with.

How do you reboot a stacked network? is it safe?

Could the loss of web GUI response be attributable to anything else?

All other traffic on the LAN is working correctly.

regards, Andy Taylor

Hello All

We have just setup 2 N2048 switches in a stack and have enabled multicast on the switches with the mvr command.

Im getting some log emails and i can't find out what the problem is. The msg say

MVR[128222148]: mvr_cfg.c(275) 21283 %% Interface number 650 is out of range <187> Mar 30 13:41:49 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21224 %% Interface number 650 is out of range <187> Mar 30 13:41:49 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21223 %% Interface number 650 is out of range <187> Mar 30 13:40:43 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21164 %% Interface number 650 is out of range <187> Mar 30 13:40:43 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21163 %% Interface number 650 is out of range <187> Mar 30 13:39:43 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21103 %% Interface number 650 is out of range <187> Mar 30 13:39:43 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21102 %% Interface number 650 is out of range <187> Mar 30 13:38:51 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21043 %% Interface number 653 is out of range <187> Mar 30 13:38:51 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21042 %% Interface number 652 is out of range <187> Mar 30 13:38:51 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21041 %% Interface number 653 is out of range <187> Mar 30 13:38:51 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21040 %% Interface number 652 is out of range <187> Mar 30 13:38:51 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21039 %% Interface number 653 is out of range <187> Mar 30 13:38:51 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 21038 %% Interface number 652 is out of range <187> Mar 30 13:36:13 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 20863 %% Interface number 650 is out of range <187> Mar 30 13:36:13 10.234.10.3-2 MVR[128222148]: mvr_cfg.c(275) 20862 %% Interface number 650 is out of range <187> Mar 30 13:36:13 10.234.10.3-2 

I would like to figure this out. Everything is working ok.

Regards

Jan-Tore

I have a network that is using all Dell Power Connect switches.  Beginning in late December, I began noticing a large amount of IPv6 traffic being generated from what I can tell Dell desktops within my network.  While using Wireshark, I notice tons of "Multicast Listener Report" which is saturating the network.  We believe this is being caused by NIC drivers that need to be updates.

Regardless of the driver update, I'm attempting to figure out a way to lessen the affect of these broadcast across the network.  I would like to find a way to filter out or block the IPv6 broadcast from affecting all areas of network.

I currently have a PC 7024F as a main core switch.  Each building has a PC 6024 and each floor wiring closet are PC 5324.  

Note; the effect is not affecting server or desktops since they are rejecting the packets, the items being affected are systems that are appliances.

Any feedback or suggesting would be greatly associated

Randy

I have two PowerConnect 2816's.  On one, I have a WLAN access point that has an SSID for the default VLAN, and a separate SSID for a guest VLAN.   On the other 2816, I have a router with a physical interface for each VLAN.

I know how to configure a port for a specific VLAN, however I seem to be confused on how to handle configuring the switches to support tagged VLAN's that the WLAN AP requires.

Thanks,

Mike

Dear support

I updated PC 8024 fw to 5.1.2.3 ,FW download and cpld update (6)successfully ,but when I boot image1(3.1.4.5)  to image2 (5.1.2.3),it will show “met an error on decompressing ,switch needs to restart. Then it would to boot image1.I wanted to delete image2,but failed,when reload the switch ,the image2 would recover.When i want to re-update image2 ,it would show "cfiP33Write: Failed at address = fe969180, Size 4.....".Even via Xmode,it would prompt that.Please help me,thanks!

The whole log ,when update FW and recover:

console#show version

Image Descriptions

 image1 : default image

 image2 : 

 Images currently available on Flash

--------------------------------------------------------------------

 unit      image1      image2     current-active        next-active

--------------------------------------------------------------------

    1     3.1.4.5      <none>             image1             image1

console#cop show interfaces p interface out-of-band

IP Address..................................... 192.168.72.30

Subnet Mask.................................... 255.255.255.0

Default Gateway................................ 0.0.0.0

IPv6 Prefix is ................................ FE80::5E26:AFF:FEA3:1E16/64

ServPort Configured Protocol Current........... None

Burned In MAC Address.......................... 5C26.0AA3.1E16

console#copy t192.168.72.10/PC8024v5.1.7.5.stk image

Mode........................................... TFTP 

Set TFTP Server IP............................. 192.168.72.10

TFTP Path...................................... ./

TFTP Filename.................................. PC8024v5.1.7.5.stk

Data Type...................................... Code           

Destination Filename........................... image

Management access will be blocked for the duration of the transfer

Are you sure you want to start? (y/n) y

cfiP33Write: Failed at address = fe969180, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 1591
0x545c180 (tXbdService): checkStatus() ERROR line 1911
0x545c180 (tXbdService): checkStatus() ERROR line 573
cfiP33Write: Failed at address = ff803410, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 1591
0x545c180 (tXbdService): checkStatus() ERROR line 1911
0x545c180 (tXbdService): checkStatus() ERROR line 573
cfiP33Write: Failed at address = ff804410, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line cfiP331591Write
0x545c180 (: Failed at addresstXbdService = ): checkStatus() ERROR line ff8054101911
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed ): at address = checkStatus() ERROR line ff8064101591
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed ): at address = checkStatus() ERROR line ff807410573
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed a): t address = checkStatus() ERROR line 1911ff808410
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed at):  address = checkStatus() ERROR line f1591f809410
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed at):  address = checkStatus() ERROR line f573f80a410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed at ): address = checkStatus() ERROR line ff191180b410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed at a): ddress = checkStatus() ERROR line ff815910c410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed at a): ddress = checkStatus() ERROR line ff85730d410
0x545c180 (tXbdService, Size ): 4checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed at ad): dress = checkStatus() ERROR line ff801911e410
0x545c180 (tXbdService, Size ): 4checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed at add): ress = checkStatus() ERROR line ff80f1591410
0x545c180 (tXbdService, Size ): checkStatus() ERROR line 41911
0x545c180 (
tXbdService): checkStatus() ERROR line cfiP33Write573
0x545c180: Failed at ad (dress = tXbdServiceff810410): checkStatus() ERROR line , S1591ize
0x545c180 (tXbdService4): checkStatus() ERROR line 1911

0x545c180 (tXbdServicecfiP33Write): : Failed at addrescheckStatus() ERROR line s = 573
0x545c180ff811410 (tXbdService, Size ): checkStatus() ERROR line 41591

0x545c180 (tXbdServicecfiP33Write): : Failed at addresscheckStatus() ERROR line  = 1911
0x545c180ff812410 (tXbdService, Size ): checkStatus() ERROR line 4573

0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at add1591ress =
0x545c180ff813410 (tXbdService, Size ): checkStatus() ERROR line 41911

0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at add573ress =
0x545c180 (ff814410tXbdService, Size ): checkStatus() ERROR line 41591

0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at addr1911ess =
0x545c180 (fe025e10tXbdService, Size ): TcheckStatus() ERROR line 4573F

0xT545c180 (tXbdServiceP): cfiP33WricheckStatus() ERROR line  1591te
c0x: Fa545c180o (iled at adtXbdServiced): dresscheckStatus() ERROR line e1911 =
 0xfe0545c180t (26e10tXbdServicer): , Size checkStatus() ERROR line a5734
n0x
545c180s (ftXbdServicecfiP33): echeckStatus() ERROR line Write1591r
0x: Failed at addres545c180  (s = tXbdServices): fe027e10checkStatus() ERROR line t1911, Size
a0x4545c180r (
tXbdServicet): cfiP33WritecheckStatus() ERROR line i573: Failed at add
n0xress = 545c180g (fe028e10tXbdService):
checkStatus() ERROR line , Size 1591

0x4545c180
 (
tXbdService
): cfiP33WricheckStatus() ERROR line
1911te
00x: Fa545c180  (iled at adtXbdServiceb): dresscheckStatus() ERROR line y573 =
t0xfe02545c180e (9e10tXbdServices): , Size checkStatus() ERROR line  15914
t0x
545c180r (atXbdServicecfiP33): ncheckStatus() ERROR line Write1911s
0x: Failed at addres545c180f (s = tXbdServicee): fe96a0eccheckStatus() ERROR line r573, Size
r0x276545c180e (
tXbdServiced): cfiP33WritecheckStatus() ERROR line .1591: Failed at a
.0xddress = 545c180 (.tXbdServicefe9601): 8ccheckStatus() ERROR line , Size 19114
0x545c180 (tXbdService
): checkStatus() ERROR line cfiP33573Write
0x545c180 (tXbdService: Failed ): at address = checkStatus() ERROR line fe96018c1591
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
1911
0x545c180 (tXbdService): checkStatus() ERROR line
573
0x545c180/DskVol// (tXbdService  - disk check i): n progress ...checkStatus() ERROR line
1591
0x545c180 (tXbdService
): checkStatus() ERROR line /1911DskVol//files
0x545c180
 (tXbdService/DskVol//files/vpd.): bincheckStatus() ERROR line
573
0x545c180/DskVol//files/ (log2.bintXbdService
): checkStatus() ERROR line /DskVol//f1591iles/boot.dim
0x545c180  (tXbdService
): checkStatus() ERROR line /DskVol//f1911iles/crashdump.c
tl0x545c180 (tXbdService
): checkStatus() ERROR line /DskVo573l//files/image1
0x 545c180 (tXbdService ): checkStatus() ERROR line  1591
0x545c180  (tXbdService):  checkStatus() ERROR line  1911
0x545c180  (tXbdService):  checkStatus() ERROR line
573
0x545c180/DskVol//files/hpc_ (broad.cfgtXbdService
): checkStatus() ERROR line /DskVol//1591files/slog2.txt
0x 545c180 (tXbdService ): checkStatus() ERROR line  1911
0x545c180  (tXbdService ): checkStatus() ERROR line
573
0x545c180/DskVol//files/o (log2.txttXbdService ): checkStatus() ERROR line
646
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
cfiP33Write: Failed at address = fe969190, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 1591
0x545c180cfiP33Write (tXbdService: Failed at addr): ess = checkStatus() ERROR line ff8034191110
0x545c180 (tXbdService, Size ): checkStatus() ERROR line 4573

0x545c180 (cfiP33WritetXbdService: Failed at addre): ss = checkStatus() ERROR line ff8044115910
0x545c180 (tXbdService, Size ): checkStatus() ERROR line 41911
0x545c180 (tXbdService
): checkStatus() ERROR line 573cfiP33Write
0x545c180: Failed at addr (ess = tXbdService): ff805410checkStatus() ERROR line , Siz1591e
0x545c180 (tXbdService4): checkStatus() ERROR line
1911cfiP33Write
0x545c180: Failed at addr (ess = tXbdService): ff806410checkStatus() ERROR line , Siz573e
0x545c180 (tXbdService4): checkStatus() ERROR line
1591cfiP33Write

0x: F545c1800 (ailed at atXbdService ): ddrescheckStatus() ERROR line b1911s =
y0xff545c180t (807410tXbdServicee): , Size checkStatus() ERROR line s5734
 0x
545c180 (ttXbdServicecfiP33): rcheckStatus() ERROR line Write1591a
0x: Failed at addres545c180n (s = tXbdServices): ff808410checkStatus() ERROR line f1911, Size
e0x4545c180r (
tXbdServicer): cfiP33WritecheckStatus() ERROR line e573: Failed at add
d0xress = 545c180. (ff809410tXbdService): .checkStatus() ERROR line , Size 1591
.0x4545c180 (tXbdService
): checkStatus() ERROR line cfiP331911Write
0x545c180 (: Failed at addresstXbdService = ): checkStatus() ERROR line ff80a410573
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed ): at address = checkStatus() ERROR line ff80b4101911
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed a): t address = checkStatus() ERROR line 1591ff80c410
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed a): t address = checkStatus() ERROR line 573ff80d410
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed at):  address = checkStatus() ERROR line f1911f80e410
0x545c180, Size  (tXbdService4): checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed at ): address = checkStatus() ERROR line ff159180f410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed at ): address = checkStatus() ERROR line ff573810410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
1591
0x545c180cfiP33Write (tXbdService: Failed at a): ddress = checkStatus() ERROR line ff8191111410
0x545c180 (, Size tXbdService): 4checkStatus() ERROR line
573
0x545c180cfiP33Write (tXbdService: Failed at ad): dress = checkStatus() ERROR line ff8115912410
0x545c180 (tXbdService, Size ): 4checkStatus() ERROR line
1911
0x545c180cfiP33Write (tXbdService: Failed at ad): dress = checkStatus() ERROR line ff815733410
0x545c180 (tXbdService, Size ): checkStatus() ERROR line 41591
0x545c180 (
tXbdService): checkStatus() ERROR line cfiP33Write1911
0x545c180: Failed at a (ddress = tXbdServiceff814410): checkStatus() ERROR line , 573Size
0x545c180 (tXbdService4): checkStatus() ERROR line 1591

0x545c180 (tXbdServicecfiP33Write): : Failed at addrescheckStatus() ERROR line s = 1911
0x545c180fe025e10 (tXbdService, Size ): checkStatus() ERROR line 4573

0x545c180 (tXbdServicecfiP33Write): : Failed at addresscheckStatus() ERROR line  = 1591
0x545c180fe026e10 (tXbdService, Size ): checkStatus() ERROR line 41911

0x545c180 (tXbdServicecfiP33Write): : Failed at addresscheckStatus() ERROR line  = 573
0x545c180fe027e10 (tXbdService, Size ): checkStatus() ERROR line 41591

0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at add1911ress =
0x545c180fe028e10 (tXbdService, Size ): checkStatus() ERROR line 4573

0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at addr1591ess =
0x545c180 (fe029e10tXbdService, Size ): checkStatus() ERROR line 41911

0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at addr573ess =
0x545c180 (fe96018ctXbdService): , Size checkStatus() ERROR line 41591

0x545c180 (tXbdServicecfiP33Write): checkStatus() ERROR line : Failed at addre1911

ss = 0x0545c180fe96018c ( tXbdService, Size ): bcheckStatus() ERROR line 4573y

0xt545c180 (tXbdServicee): cfiP33WcheckStatus() ERROR line s1591rite
 0x: 545c180t (Failed at tXbdServicer): addrecheckStatus() ERROR line a1911ss =
n0xf545c180s (e96018ctXbdServicef): , Size checkStatus() ERROR line e5734
r0x
545c180r (cfiP33WritetXbdServicee): : Failed acheckStatus() ERROR line d1591t address
.0x= 545c180. (fe96tXbdService.): 018ccheckStatus() ERROR line , Size 1911
0x545c1804 (tXbdService):
checkStatus() ERROR line error accessi573ng cache for dos v

0xolume 0x545c180/ (DskVol//tXbdService  - disk check in p): rogress ...checkStatus() ERROR line
1591

1a4673d00x/Dsk545c180Vol//files (
tXbdService
): checkStatus() ERROR line 1911/DskVol//files/v
pd.bin0x545c180 (tXbdService
): checkStatus() ERROR line /D573skVol//files/log2
.bin0x545c180 (tXbdService
): checkStatus() ERROR line /Dsk1591Vol//files/boot.
dim0x545c180 (tXbdService ): checkStatus() ERROR line
1911
/DskVol//files/cras0xhdump.ctl545c180 (tXbdService
): checkStatus() ERROR line 573/DskVol//files/im
age10x545c180 (tXbdService ): checkStatus() ERROR line  1591
0x545c180 (tXbdService ): checkStatus() ERROR line  1911
0x 545c180 (tXbdService ): checkStatus() ERROR line  573
0x545c180
 (tXbdService): /DskVol//files/hpcheckStatus() ERROR line c_broad.cfg1591

0x545c180 (tXbdService/DskVol//files/s): log2.txtcheckStatus() ERROR line  1911
0x545c180 (tXbdService ): checkStatus() ERROR line  573
0x 545c180 (tXbdService
): checkStatus() ERROR line /DskVol//646files/olog2.txt
 
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0

5105152 bytes transferred...
11139584 bytes transferred...
12307736 bytes transferred   

Verifying CRC of file in Flash File System

cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0

Distributing the code to the members of the stack!

File transfer operation completed successfully.

console#show version

Image Descriptions

 image1 : default image

 image2 : 

 Images currently available on Flash

--------------------------------------------------------------------

 unit      image1      image2     current-active        next-active

--------------------------------------------------------------------

    1     3.1.4.5     5.1.2.3             image1             image1

console#boot system image2

Activating image image2 ..cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180
 (tXbdService): checkStatus() ERROR line
646

console#
/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0

console#boot system image2

Activating image image2 ..

console#show version

Image Descriptions

 image1 : default image

 image2 : 

 Images currently available on Flash

--------------------------------------------------------------------

 unit      image1      image2     current-active        next-active

--------------------------------------------------------------------

    1     3.1.4.5     5.1.2.3             image1             image2

console#reload

Management switch has unsaved changes.

Are you sure you want to continue? (y/n) y

Configuration Not Saved!

Are you sure you want to reload the stack? (y/n) y

Reloading all switches.cfiP33Write: Failed at address = ff340f8c, Size 116
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0

Adding 2970 symbols for standalone.

Boot Menu 3.1.4.5
CPU Card ID:   0x10508548
CFI Probe: Found x16 device in x16 mode
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe960178, Size 4
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe96017c, Size 4

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0

volume descriptor ptr (pVolDesc):    0x3cab5f0
XBD device block I/O handle: 0x10001
auto disk check on mount:      DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode:         copyback (DOS_WRITE)
max # of simultaneously open files:    52
file descriptors in use:       0
# of different files in use:       0
# of descriptors for deleted files:    0
# of  obsolete descriptors:        0

current volume configuration:
 - volume label:    NO LABEL ; (in boot sector:              )
 - volume Id:       0xf6
 - total number of sectors:   61,376
 - bytes per sector:     512
 - # of sectors per cluster: 4
 - # of reserved sectors:    1
 - FAT entry size:      FAT16
 - # of sectors per FAT copy:    60
 - # of FAT table copies:   2
 - # of hidden sectors:      4
 - first cluster is in sector #  136
 - Update last access date for open-read-close = FALSE
 - directory structure:  VFAT
 - file name format:  8-bit (extended-ASCII)
 - root dir start sector:  121
 - # of sectors per root:  15
 - max # of entries in root:  240

FAT handler information:
------------------------
 - allocation group size: 2 clusters
 - free space on volume: 9,367,552 bytes

cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0Boot Menu  (3tXbdService.1.4.5):
checkStatus() ERROR
 line /DskVol//646
 - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
Select an option. If no selection in 10 seconds then
operational code will start.

1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):2

Boot Menu 3.1.4.5

Options available
1  - Start operational code
2  - Change baud rate
3  - Retrieve event log using XMODEM
4  - Load new operational code using XMODEM
5  - Display operational code vital product data
6  - Abort boot code update
7  - Update boot code
8  - Delete backup image
9  - Reset the system
10 - Restore configuration to factory defaults (delete config files)
11 - Activate Backup Image
12 - Password Recovery Procedure
13 - Reformat and restore file system
[Boot Menu] 1

Operational Code Date: Wed May  5 00:58:31 2010
Uncompressing.....

Host Name: bootHost
Target Name: vxTarget
User: target
usrNetIpAttachCommon: unknown network device

Adding 70479 symbols for standalone.
 CPU: Freescale E500 : Unknown system version.  Processor #0.
 Memory Size: 0x40000000.  BSP version 2.0/2.
 Created: May  5 2010, 00:01:39
 ED&R Policy Mode: deployed
remLib: Not initialized.
remLib: Not initialized.
CFI Probe: Found x16 device in x16 mode
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe960178, Size 4
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe96017c, Size 4

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0

volume descriptor ptr (pVolDesc):    0x545ddc0
XBD device block I/O handle: 0x10001
auto disk check on mount:      DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode:         copyback (DOS_WRITE)
max # of simultaneously open files:    52
file descriptors in use:       0
# of different files in use:       0
# of descriptors for deleted files:    0
# of  obsolete descriptors:        0

current volume configuration:
 - volume label:    NO LABEL ; (in boot sector:              )
 - volume Id:       0xf6
 - total number of sectors:   61,376
 - bytes per sector:     512
 - # of sectors per cluster: 4
 - # of reserved sectors:    1
 - FAT entry size:      FAT16
 - # of sectors per FAT copy:    60
 - # of FAT table copies:   2
 - # of hidden sectors:      4
 - first cluster is in sector #  136
 - Update last access date for open-read-close = FALSE
 - directory structure:  VFAT
 - file name format:  8-bit (extended-ASCII)
 - root dir start sector:  121
 - # of sectors per root:  15
 - max # of entries in root:  240

FAT handler information:
------------------------
 - allocation group size: 2 clusters
 - free space on volume: 9,367,552 bytes

cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646
Error opening the image file image1

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
PCI unit 0: Dev 0xb820, Rev 0x11, Chip BCM56820_B0, Driver BCM56820_A0
SOC unit 0 attached to PCI device BCM56820_B0
Adding BCM transport pointers
Configuring CPUTRANS TX
Configuring CPUTRANS RX
hpc - No stack ports. Starting in stand-alone mode.
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
cfiP33Write: Failed at address = ff340f8c, Size 116
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERR

OR line 646
<186> MAR 31 16:00:30 0.0.0.0-1 UNKN[1073741088]: bootos.c(209) 1 % Event(0xaaaaaaaa)

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
Instantiating RamCP: as rawFs,  device = 0xe0001
Formatting RamCP: for DOSFS
Instantiating RamCP: as rawFs, device = 0xe0001
Formatting...
RamCP:/  - disk check in progress ...

RamCP:/  - Volume is OK

   total # of clusters: 1,975
    # of free clusters: 1,973
     # of bad clusters: 0
      total free space: 1,010,176
    max contiguous free space:  1,010,176 bytes
     # of files: 0
   # of folders: 0
  total bytes in files: 0
      # of lost chains: 0
   total bytes in lost chains:  0
OK.

(Unit 1 - Waiting to select management unit)>cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0

Applying Global configuration, please wait ...

Applying Interface configuration, please wait ...

console>enable

console#show devshell cpldTest
Board Type                : Campbell 24T
Board Version             : 3
CPLD Revision             : 6 (0x6)
RPS2 Present
RPS2 Status               : Working
RPS2 Temperature          : Normal
RPS2 Fan Status           : Working
RPS1 Present
RPS1 Status               : Working
RPS1 Temperature          : Normal
RPS1 Fan Status           : Working
Port   SFP Status  Link Status  Tx Power
----   ----------  -----------  --------
  21      Present         Down   Enabled
  22      Present         Down   Enabled
  23      Present         Down   Enabled
  24      Present         Down   Enabled
Fan control IC has failed
Fan1 Status               : Working
Fan2 Status               : Working
Fan3 Status               : Working

value = 36 = 0x24

console#show version

Image Descriptions

 image1 : default image

 image2 : 

 Images currently available on Flash

--------------------------------------------------------------------

 unit      image1      image2     current-active        next-active

--------------------------------------------------------------------

    1     3.1.4.5     5.1.2.3             image1             image1

console#reload

Are you sure you want to reload the stack? (y/n) y

Reloading all switches.cfiP33Write: Failed at address = ff340f8c, Size 116
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x545c180 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0

Adding 2970 symbols for standalone.

Boot Menu 3.1.4.5
CPU Card ID:   0x10508548
CFI Probe: Found x16 device in x16 mode
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe960178, Size 4
cfiP33Write: Failed at address = fe969c00, Size 512
0x3ffffd20 (tRootTask): trouble / trouble
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3ffffd20 (tRootTask): checkStatus() ERROR line 1475
cfiP33Write: Failed at address = fe96017c, Size 4

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0

volume descriptor ptr (pVolDesc):    0x3cab5f0
XBD device block I/O handle: 0x10001
auto disk check on mount:      DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode:         copyback (DOS_WRITE)
max # of simultaneously open files:    52
file descriptors in use:       0
# of different files in use:       0
# of descriptors for deleted files:    0
# of  obsolete descriptors:        0

current volume configuration:
 - volume label:    NO LABEL ; (in boot sector:              )
 - volume Id:       0xf6
 - total number of sectors:   61,376
 - bytes per sector:     512
 - # of sectors per cluster: 4
 - # of reserved sectors:    1
 - FAT entry size:      FAT16
 - # of sectors per FAT copy:    60
 - # of FAT table copies:   2
 - # of hidden sectors:      4
 - first cluster is in sector #  136
 - Update last access date for open-read-close = FALSE
 - directory structure:  VFAT
 - file name format:  8-bit (extended-ASCII)
 - root dir start sector:  121
 - # of sectors per root:  15
 - max # of entries in root:  240

FAT handler information:
------------------------
 - allocation group size: 2 clusters
 - free space on volume: 9,367,552 bytes

cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0Boot Menu  (3tXbdService.1.4.5):
checkStatus() ERROR
 line /DskVol//646
 - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
Select an option. If no selection in 10 seconds then
operational code will start.

1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):2

Boot Menu 3.1.4.5

Options available
1  - Start operational code
2  - Change baud rate
3  - Retrieve event log using XMODEM
4  - Load new operational code using XMODEM
5  - Display operational code vital product data
6  - Abort boot code update
7  - Update boot code
8  - Delete backup image
9  - Reset the system
10 - Restore configuration to factory defaults (delete config files)
11 - Activate Backup Image
12 - Password Recovery Procedure
13 - Reformat and restore file system
[Boot Menu] 11
cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
cfiP33Write: Failed at address = fe96a0d8, Size 296
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0 (tXbdService): checkStatus() ERROR line
646
/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
cfiP33Write: Failed at address = fe96018c, Size 4
0x3f587f0 (tXbdService): checkStatus() ERROR line 646

/DskVol//  - disk check in progress ...

/DskVol//files
/DskVol//files/vpd.bin
/DskVol//files/log2.bin
/DskVol//files/boot.dim
/DskVol//files/crashdump.ctl
/DskVol//files/image1       
/DskVol//files/hpc_broad.cfg
/DskVol//files/slog2.txt    
/DskVol//files/olog2.txt
/DskVol//files/sslt.rnd 
/DskVol//files/slog1.txt
/DskVol//files/olog1.txt
/DskVol//files/image2   
/DskVol//files/slog0.txt
/DskVol//files/olog0.txt
/DskVol//files/dh512.pem
/DskVol//files/dh1024.pem
/DskVol//files/startup-config
/DskVol//files/fastpath.cfg  
/DskVol//files/hpc_port_broad.cfg
/DskVol//files/fsyssize          
                                                                                           

/DskVol//  - Volume is OK

   total # of clusters: 15,312
    # of free clusters: 4,574
     # of bad clusters: 0
      total free space: 9,148 Kb
    max contiguous free space:  9,367,552 bytes
     # of files: 20
   # of folders: 1
  total bytes in files: 21,450 Kb
      # of lost chains: 0
   total bytes in lost chains:  0
Backup image - image2 activated.
[Boot Menu] ?

Boot Menu 3.1.4.5

Options available
1  - Start operational code
2  - Change baud rate
3  - Retrieve event log using XMODEM
4  - Load new operational code using XMODEM
5  - Display operational code vital product data
6  - Abort boot code update
7  - Update boot code
8  - Delete backup image
9  - Reset the system
10 - Restore configuration to factory defaults (delete config files)
11 - Activate Backup Image
12 - Password Recovery Procedure
13 - Reformat and restore file system
[Boot Menu] 1

Operational Code Date: Mon Oct 14 14:14:09 2013

Uncompressing.....

There was an error during decompression... resetting the switch

Adding 2970 symbols for standalone.

For *** children, taking the step of moving out of the house, whether it’s to go away to college, get married, or start a career of their own, is a little nerve-racking, but mostly exciting. It’s a new adventure and one most kids take on eagerly as they finally achieve that independence they’ve been craving.

Move-out day has a different meaning for parents, however, especially when the last child moves away. Yes, they’re excited for their children and ready to see them succeed, and yes, it’s nice to finally have the house to themselves, but it’s also a time of mourning and nostalgia for a full house and fun family memories.

Moving on to the next phase

Empty-nesters are also faced with a number of questions about their new lives. If the kids have all moved away, is it time for you to move, too? Should you downsize? If not, what do you do with all the empty rooms? What will you do with your time now that there are no kids at home to care for?


Re-evaluating your lifestyle


First of all you should decide on whether you’ll keep the house at all. Evaluate your health and the layout of your home: will you be able to navigate the house as you age? Are all the necessary rooms (master bedroom, laundry, kitchen, etc) all on the ground floor? How about the entrance to your home—is it split level, split entry? Would it be easy to construct a ramp up to the front door if necessary?
Also consider whether having extra space outweighs the hassle of paying higher heating and cooling bills, time spent cleaning, and yard maintenance. If you’re ready to simplify your life, now is the time to make a change.


Fulfilling your lifelong dreams


You may be a young empty-nester or anticipate many years of good health ahead of you. If so, having an entire house to yourself might seem like a dream come true. Now you can finally turn all those extra bedrooms into the hobby rooms you’ve wanted your whole life. Make a list of possible options, such as craft room, home office, trophy room, guest room, sewing room, man cave, etc. Determine which of these options is most feasible, which ones are within your budget, which ones will get the most use. Then commence planning your renovation.


Interior Decorating and Remodeling News Brought to You by BaseBoardRadiatorCover.com
Source: tennessean.com/story/money/real-estate/2015/03/27/get-creative-empty-nest/70490042/

Hello everyone

Using Force10 S4820T on 9.6

Can rate limits be applied to physical interfaces only? and if so how do I go about setting a rate limit on a vlan interface? Policy-map??

Thanks in advance

I haven't been able to find in documentation or posts a simple, "if you have this connected to a port, configure it this way" post.

So here goes:

We have several powerconnect 6200's. They are physically connected in a somewhat hierarchical way, with...

...all switches using RSTP

...a "core" 6224 that handles uplinks from the other switches, along with connections to various firewalls/routers, etc.

this "core" is configured with a lowered STP priority so that it remains Root Bridge

Since this is the Root Bridge and mainly has connections to other downstream switches, firewalls and routers...

Q: In the STP Global Settings window, what should theses settings be:

BPDU Flooding (Disable/Enable)

Port Fast BPDU Filter (Disable/Enable)

Loop Guard (Disable/Enable)

BPDU Protection (Disable/Enable)

For it's ports that are connected to downstream 6224's acting as access switches for most users...

Q: in the STP Port Settings window, what should each Switch-Connected port have for

STP Root Guard  (Disable/Enable)

Loop Guard (Disable/Enable)

TCN Guard (Disable/Enable)

Auto Edge (Disable/Enable)

Do any of these settings change for unmanaged L2 switches?

...for those downstream 6224's that are access switches

Q: In their STP Global Settings window, what should theses settings be:

BPDU Flooding (Disable/Enable)

Port Fast BPDU Filter (Disable/Enable)

Loop Guard (Disable/Enable)

BPDU Protection (Disable/Enable)

most of these ports are single-host connections, both servers and end-users

those that are have Port Fast enabled

Q: in the STP Port Settings window, what should each Host-Connected port have for

STP Root Guard  (Disable/Enable)

Loop Guard (Disable/Enable)

TCN Guard (Disable/Enable)

Auto Edge (Disable/Enable)

there are a fair number of downstream unmanaged L2 switchesserving areas where we can't avoid them

Q: in the STP Port Settings window, what should each Switch-Connected port have for

STP Root Guard  (Disable/Enable)

Loop Guard (Disable/Enable)

TCN Guard (Disable/Enable)

Auto Edge (Disable/Enable)

Finally, what should these per-port settings be for the ports that UPLINK to the core/root?

STP Root Guard  (Disable/Enable)

Loop Guard (Disable/Enable)

TCN Guard (Disable/Enable)

Auto Edge (Disable/Enable)

We recently deployed N2048p switches in our building to replace our aging Cisco 3750G switches and ran into some problems with POE.  We have some devices that work perfectly fine with the Cisco switch but will not power on with the Dell switches.  Most of the devices in question are AAstra 6725IP phones, and about a third of them won't power on at all.  The N2048 shows "test-fail" on the status column with a "show power inline".  We are on the latest firmware 6.2.0.5 and the latest firmware on the phones.  This is also affecting our building access system as it runs off of POE as well.  I've contacted AAstra, but so far they have been little help.  Anyone else had the same experience?

Hi,i want to buy a Cisco Catalyst 2960 Switches. What are the main differences between WS-C2960S-24TS-L and WS-C2960S-24PS-L ? Anyone can help me?

Thanks

Hi Team,

My Dell 6248 switch is not getting up, showing following error message.

1  - Start operational code
2  - Change baud rate
3  - Retrieve event log using XMODEM
4  - Load new operational code using XMODEM
5  - Display operational code vital product data
6  - Abort boot code update
7  - Update boot code
8  - Delete backup image
9  - Reset the system
10 - Restore configuration to factory defaults (delete config files)
11 - Activate Backup Image
12 - Password Recovery Procedure
13 - Reformat and restore file system
[Boot Menu]

Regards,

Pradnyesh Gharat

After we did a firmware upgrade of the N2048, the switch are getting dot1sbpdureceive () : discarding the bpdu, since it is an invalid bpdu type.  anyone?

We are in the midst of spec'ing 2 to 4 CORE switches to be utilized within a virtualized environment.  When reviewing switch specs...what are the most important aspects to look at when comparing?  Is it Switch fabric,  PPS or are there some hidden items people typically overlook when reviewing switches?  We have a working set of Dell 6224's within our network but will be looking at the N4000 series switches for our Core.  Any insight would be greatly appreciated.

Having an issue with tunneling VLAN traffic over a service provider q'in'q trunk.  One side I have a Cisco 3750 with dot1q configured and on the other side a Dell 6224 with the uplink port set to general.  Does the Dell switch need additional configuration when connected to a service provider switch that haa q'in'q configured?

I have this setup within the same facility and it works flawlessly, this is the first time using a q'in'q ISP connection.

I have  a 6248 Dell switch with following vlan's created

interface vlan 2
name "ISCSI1"
exit
interface vlan 3
name "ISCSI2"
exit

interface vlan 4
name "CSV"
exit
interface vlan 5
name "LiveMigration"
exit

And have interfaces assigned to the vlan's.

interface ethernet 1/g2
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 2
exit

!
interface ethernet 1/g3
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 2
exit
!
interface ethernet 1/g4
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 2
exit
!
interface ethernet 1/g5
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 2
exit

!
interface ethernet 1/g6
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 2
exit
!
interface ethernet 1/g7
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 2
exit
!
interface ethernet 1/g8
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 3
exit

!
interface ethernet 1/g9
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 3
exit
!
interface ethernet 1/g10
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 3
exit
!
interface ethernet 1/g11
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 3
exit

!
interface ethernet 1/g12
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 3
exit
!
interface ethernet 1/g13
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 3
exit
!
interface ethernet 1/g14
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 4
exit

!
interface ethernet 1/g15
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 4
exit
!
interface ethernet 1/g16
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 4
exit
!
interface ethernet 1/g17
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 5
exit

!
interface ethernet 1/g18
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 5
exit
!
interface ethernet 1/g19
spanning-tree disable
spanning-tree portfast
mtu 9216
switchport access vlan 5

However there is not ip address assigned to vlan, No network is assigned to any vlan.

My question is are these vlan active and then how are they communicating with each other?

I just bought my first used managed switch, a PowerConnect 5324.

Software Version     2.0.1.4     
Boot Version     1.0.2.02     
Hardware Version     00.00.02

Being new to managed switched, I am not sure I can say if there is a problem with it or not.

This is what I noticed.

1. I am using about 16 or so of the 24 available ports.  I noticed that the LNK/ACT LEDs of ALL connected ports are constantly flickering, compared to when I was using a non-managed switch.

2. The DIAG led is off.  According to the manual, it should be on and green in the absence of problems.  As I connected to the 5324 using the serial cable and PuTTY, I noticed that the switch booted successfully without any problems.  Shouldn't the DIAG LED be on then?

Sorry for the "basic" questions.

Renato

I have just joined a company and i am trying to understand the topology.
We are using few powerconect 6248 and 5548. there are hosts, servers and virtual machines attached to them

How can I check the ip addresses and type of the machines attached to them?

I have tried "show lldp neighbor" and "show isdp neighbor" but they are just showing the switches attached not the hosts and servers.