good morning all
I have a the N3024 in a pretty basic configuration- there is a single Avid *** (SAN solution) with a single Myricom 10Gb card connected to the front 10Gb port on the N3024 -there is no zoning, and nothing really special in the config- (config file below)
there are Windows7 and Mac OS clients connected to the switch via Cat6- Avid provides a Path Diagnostic tool to confirm bandwidth for video editing- and here is where things get weird-
any MacPro client connected via dual GigE gets the expected 190-200+MB/s on both READ and WRITE tests...
but the Windows7 client will only get 25-30MB/s WRITE -oddly enough the READ bandwidth tests out at the normal 190-200MB/s over the dual connection
the N3025 has been reset to factory default and the Avid configuration re-applied- but no change to the test results- has anyone seen anything like this?
thanks again in advance
here is the config file:
!Current Configuration:
!System Description "Dell Networking N3024, 6.1.0.6, Linux 3.6.5-320b2282"
!System Software Version 6.1.0.6
!
configure
vlan 10
exit
slot 1/0 1 ! Dell Networking N3024
slot 1/1 10 ! Dell SFP+ Card
stack
member 1 1 ! N3024
exit
interface vlan 1
ip address dhcp
exit
interface vlan 10
ip address 10.93.50.1 255.255.255.0
exit
no passwords min-length
username "avid" password 18e9e8b7badf07435c3e1a78717e4b43 privilege 15 encrypted
!
interface Gi1/0/1
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/2
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/3
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/4
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/5
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/6
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/7
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/8
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/9
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/10
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/11
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/12
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/13
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/14
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/15
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/16
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/17
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/18
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/19
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/20
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/21
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/22
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/23
spanning-tree portfast
switchport access vlan 10
exit
!
interface Gi1/0/24
spanning-tree portfast
switchport access vlan 10
exit
!
interface Te1/0/1
spanning-tree portfast
switchport access vlan 10
exit
!
interface Te1/0/2
spanning-tree portfast
switchport access vlan 10
exit
!
interface Te1/1/1
spanning-tree portfast
switchport access vlan 10
exit
!
interface Te1/1/2
spanning-tree portfast
switchport access vlan 10
exit
snmp-server engineid local 800002a203f8b1562b98fa
exit