I have a KVM 4322DS that I think may be bricked.
It appears to have the same FW in current and alternative. Booting into either results in it sitting at the Booting line below:
U-Boot version:U-Boot 1.3.0-rc3 (May 21 2010 - 15:10:16) Polaris 1.6.15018
Dell
Serial Number:RO0F4W28696491CG4DC7A00
EID:520849-0007FC-0000
MAC Addr 1:00:E0:86:19:E9:D0
MAC Addr 2:00:E0:86:19:E9:D1
Current Firmware Version :1.6.2.15941
Alternate Firmware Version:1.6.2.15941
Hit any key to stop autoboot:+++
Booting:1.6.2.15941
Dell
Serial Number:RO0F4W28696491CG4DC7A00
EID:520849-0007FC-0000
MAC Addr 1:00:E0:86:19:E9:D0
MAC Addr 2:00:E0:86:19:E9:D1
Current Firmware Version :1.6.2.15941
Alternate Firmware Version:1.6.2.15941
Hit any key to stop autoboot:+++
Booting:1.6.2.15941
Pressing any key at boot up, I only get the following, each of the selections results in stopping at the same Booting line:
U-Boot version:U-Boot 1.3.0-rc3 (May 21 2010 - 15:10:16) Polaris 1.6.15018
Dell
Serial Number:RO0F4W28696491CG4DC7A00
EID:520849-0007FC-0000
MAC Addr 1:00:E0:86:19:E9:D0
MAC Addr 2:00:E0:86:19:E9:D1
Current Firmware Version :1.6.2.15941
Alternate Firmware Version:1.6.2.15941
Hit any key to stop autoboot:++
=================================
0) Boot Current.[1.6.2.15941]
1) Boot Alternate.[1.6.2.15941]
2) Configuration Reset.
3) Factory Reset.
Enter Number to Select Option:
Dell
Serial Number:RO0F4W28696491CG4DC7A00
EID:520849-0007FC-0000
MAC Addr 1:00:E0:86:19:E9:D0
MAC Addr 2:00:E0:86:19:E9:D1
Current Firmware Version :1.6.2.15941
Alternate Firmware Version:1.6.2.15941
Hit any key to stop autoboot:++
=================================
0) Boot Current.[1.6.2.15941]
1) Boot Alternate.[1.6.2.15941]
2) Configuration Reset.
3) Factory Reset.
Enter Number to Select Option:
Is it bricked??? Does anyone know of a backdoor way to copy another firmware image on the KVM???
