Dell X1052 routing
Working with a Dell X1052P Switch and trying to get inter vlan netowrking working with the external connection for all vlans on vlan 1.Here's my scenerioip routing enabled on switchcreated Vlans...
View ArticleN1548 as a DHCPv6 relay
Hello everybody,Was anybody able to set N1548 to work as a DHCPv6 relay? DHCPv4 works fine for me but it looks like DHCPv6 requests do not propagate through the switch. Here is my partial config of the...
View ArticleReplacing master unit from a stack
Hello,I own 2 N4032 units configured as stack.I'm about to replace the master unit with a new one.I already restored all configuration to the new switch same as the one I'm going to replace.I would...
View ArticleClik here to view.
Dell 4032 Stack switch hangs!!!!
Hello," switches hangs itself and stop responding, when we go to the site we finds that stack ports leds stops blinking and when we restart the switches every thing comes back normal. (Please visit the...
View Article8132F Firmware Upgrade
Hi all,Yesterday evening we had downtime to upgrade the firmware on 2 PowerConnect 8132F's running an old 5.1 Firmware. The switches are stacked and used for an iSCSI network with another N4032...
View ArticlePower load
hi there,I'm trying to spec a UPS and am confused about the potential load from a N2048P with an MPS1000.From the spec sheet I can seethe N2048P has a max wattage of 1738.The MPS1000 has a wattage of...
View ArticleForce10 MXL blade servers cannot ping, not showing in ARP
I have 2 MXL in slots B1 and B2, and two blade servers with NICs in the B slot.switch-b1 is the stack master, switch-b2 is the standby.The links are up and autonegotiated properly, but the blade...
View ArticleErrors detected on stack-port
<188> Oct 25 19:43:23 10G-Stack-2 STACKING[spmTask]: spm.c(1431) 13151130 %% Errors detected on stack-port 1/0/23 (oldRxErrors = 490 currentRxErrors = 491 oldTxErrors = 0 currentTxErrors = 0)....
View ArticleInteractive secure server timeout on X1052
Please can someone tell me how incerease Interactive secure server timeout on Dell X1052 switch.Because we have application on HTTPS and we are diconected after those 10 minutes of inactivity.Or how...
View ArticleS4810 LACP Error: Port is not in default mode
Would really appreciate some help; I've followed the instructions countless guides (which all say the same thing) - simply cannot get a port channel with LACP going. This is a brand new switch running...
View Article6224 Multicast Routing
I'm having a little bit of trouble wrapping my hesd around multicast routing and I'm hoping aomeone can point me in the right direction. I've got a smaller network (1 6224F amd about 8 3248p switches)...
View ArticlePowerConnect M6348 too many logs
To whom it may concern,Thank you very much for reading the following issue. There is a PowerConnect M6348 switch working in a production environment, however we are experiencing that it has been...
View Articlelook for another set of eyes. See if something is wrong here with configs
NAT configurationSeaSecurity Router Router>enRouter#conf tRouter(config)#int g0/0Router(config-if)#ip nat outRouter(config-if)#int g0/1Router(config-if)#ip nat insideRouter(config-if)#...
View Articleneed a set of eyes please eBGP
eBGP configuration Router#show ip bgpBGP table version is 1, local router ID is 172.16.102.2Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,r RIB-failure, S...
View ArticleS4048 Hardening Guide
Hello All,I am currently working on building a baseline hardening guide for the S4048. I was wondering if someone might have some tips or suggestions? I am new to the Dell networking products. Thanks...
View ArticleDell Powerconnect 2848 - COA Port
Hi there,Does anyone knows if Dells powerconnect supports COA ? if so , what is the port number?Please assist.Thanks.Noam.
View ArticleSNMP N3024F OIDS
Can someone, help me with the SNMP OIDS for monitoring this switch?i want monitor the healty of the switches, I have 2 in stack, and I can't get the OIDS of this features of switches.someone have a MIB...
View ArticleClik here to view.
SNMP N3024F - OIDS
Hello, everyone.I want know if anyone can help me with the OIDS for this switch, i can't find something about that really can help.have some MIB Quick Reference link this?Thans so much
View ArticleDell N4032 switch - disable VLAN 1
HelloWhat is the best practice around disabling VLAN 1 on a switch?I have two N4032 switches that are part of a SAN fabric. Two fault domains are configured on the two switches on VLAN 100 and VLAN...
View ArticleClik here to view.
Networking Clock Signal component failures
Has anyone had support contact them regarding the recall of affected switches (S3048-ON, S4048-ON, S4048T-ON, S6010-ON, S6100-ON, Z9100-ON and C9010 ) I'm getting different answers but it looks like...
View Article