Dell X10xx Series: Configuring RADIUS with local fallback
Hi,I'm having some trouble setting up some Dell X1024 switches for RADIUS authentication with local fallback.When I edit the authentication profile and add both RADIUS & local (even though I choose...
View ArticlePowerConnect 5548 time questions
I have a 5548 with this configuration information in it:switch1# show bootvarUnit Image Filename Version Date Status---- ----- --------- --------- ---------------------...
View ArticleHelp to track RSTP topology changes on Powerconnect 6248
Is there an easy way to track the RSTP topology changes on the PowerConnect 6248?I'm facing a very strange problem. My core switch is a Force10 4810 and its configured as low root ID priority. For all...
View ArticleProblem with the switch X1026 and CCTV system
Hi,We have installed an X1026 switch without any special configuration with almost minimum changes as it comes from the factory for a CCTV system and it has been giving constant problems such as:...
View ArticlePowerConnect N20xx vlan routing
Hi,I haven't found a good enough answer in any of the forum posts about vlan routing with the N2000 series switches. Can someone help?I did this with the 6224's and 6248's but that PDF document...
View Articlefortygigabit uplink between N4064 and S4048 links in down state
I cannot turn on the link on the fortygigabit ethernet interfaces between thoose switches.On the S4048 side:Interface fortyGigE 2/49no ip addressmtu 9216switchportno spanning-treeno shutdown And the...
View ArticleDell N1548P Access list applied to VLANs question
I've created an access-list to control traffic to a specific VLAN in my switch, but it seems as soon as I apply the access-group to the VLAN I seem to lose all ability to communicate to that VLAN, and...
View Articleunable to upgrade firmware
Hi, we just purchased these Dell X series PowerConnect switches and we decided to upgrade the firmware ASAP since the GUI is really slow and we're not sure if upgrading the firmware can help. Our...
View ArticleSecure browser recommendation for windows 10?
I'been trying to get some secure and anonymous browser for my daily routine browsing, since i have heard that browser history will be monitor from preying eyes. I been searching in Google "best secure...
View ArticleHow to monitor by VLAN on switch DELL S4048
Hi,I am working on switch DELL S4048 , could You help me how can I monitor by VLAN on this switch Please ?Thank you and Best Regards,An
View ArticleN2xxx: DHCP static applied at the port level (not mac)
I manage IT for the factory side of our businesses, and manage/connect everything to our datacenter, including PLCs and discrete components. Rockwell offers Cisco Stratix switches at a ridiculously...
View ArticlePowerconnect 5548 VLAN number limits?
Is there any limit on the number of VLANs that I can create and use on the Powerconnect 5548?I have a 5548 Powerconnect connected to a Force48 s4810 switch. Today I have created and running about 15...
View ArticleBond 6 ALB with stacked Dell N1524
Hi,we deployed 2 Dell N1524 in stacked mode and a new infrastructure based on Nodeweaver (an OpenNebula branch - 2 physical nodes with 6 gbe connector each). Each node has 3 ports connected to the...
View ArticleBridge IDs in switch stacks
I am trying to review an STP configuration and I am looking to confirm the bridge IDs. Although I can see them in the GUI, please can someone confirm if the STACK itself is the root bridge or whether...
View ArticleN3024 port security mac-address
I am trying to lock down a single port to have only one mac-address allowed. I know how to do this on a Cisco switch, but I am struggling to get the same thing on a Dell 3024. I have looked at...
View ArticleDell Powerconnect 62xx VLAN traffic to specific gateway
Hi folks,I'm having an issue and even after read several posts here my head continues a mess.The situation is as follow:I have several VLAN's created on our Dell switch's and the same VLAN's are...
View ArticleS4048 - ACCESS LIST REFLEXIVE SUPPORT?
Hello!!Is there support for access list reflexive in DELL?This is a concept that you can use the cisco for unidirectional traffic.I am trying to configure the following in an S4048.VLAN160 is allowed...
View ArticleS4048 - TenGigabitEthernet 1/17 is up, line protocol is down
Hi All, I'm having a nightmare trying to connect my S4048 Switch to my Dell R640 Server which has 2 x Broadcom 10GbE 2P 57412S Adaptors. To connect them together I'm using a Dell DAC-SFP-10G-3M...
View ArticleClik here to view.
Browsing to Dell N1548P - Secure Connection Failed - SSL_NO_CYPHER_OVERLAP
Hi Dell Community,When browsing to my N1548P switches web management via HTTPS, I get this error in Firefox.I get similar errors in Edge and Internet Explorer.I have followed the steps described in in...
View ArticleWindows Server 2016 with multiple subnets
Hi Guys,I need some help and advise. I'm doing a test with multiple dhcp subnets and here is my setup.Switch: Dell N3024Windows Server 2016: 10.10.10.110/24 (DHCP Server and Domain- mydomain.com)DHCP...
View Article